TiGHT AV Catalogue 23/24 - Catalog - Page 14
AU-202-DA
DANTE NETWORK INTERFACE,
2-IN/2-OUT ANALOG
The TiGHT AV AU-202-DA is an install friendly 2x2 Dante interface.
AU-202-DA offers a simple way to connect analog audio equipment to
Dante devices with a single cable over the network. The two inputs
supporting line and microphone levels and can apply +48V phantom
power and up to +48dB gain in 6db steps, selectable per input.
SPECIFICATIONS
INPUT
Video Input:
(2) MIC/LINE IN
Input Connector:
(2) 3-pin Green Terminal Blocks
Phantom Power:
48V, software selectable for each input
OUTPUT
Output:
(2) LINE OUT
Output Connector:
(2) 3-pin Green Terminal Blocks
Output Type:
Balanced line level with automatic muting
on loss of Dante signal
Surface Mount 2x2 Dante/AES67 Interface
4. System Connection
AU-202-DA
supports 44.1 and 48 kHz sampling rate. The unit is fully
4.1 Usage Precaution
Dante Controller and Dante Domain Manager compatible. The
Make sure all components and accessories included before installation.
AU-202-DA can be controlled and/or monitored via Dante Controller
System should be installed in a clean environment with proper temperature and
software,
humidity. the built-in web UI or the open third-party API over TCP/IP.
All the power switches, plugs, sockets, and power cords should be insulated and
safe.
The unit can be powered over POE or local 12V power supply that is
All devices should be connected before power on.
included. The POE support, the small formfactor and the included
mounting brackets makes the AU-202-DA very easy to install and place
4.2 System Diagram
where
needed.
The following diagram illustrates typical input and output connection that can be utilized
with the converter:
AUDIO PERFORMANCE
Gain:
Input: 0 ~ +48dB, 6dB per step
Max Level:
Input: +18dBu @ 0dB input gain
Input:
>1.8kΩ
Effective Input:
-119dB @ 48dB gain
Output Noise: