TiGHT AV Catalogue 2024 - Catalog - Page 24
SPECIFICATIONS
Built in power amplifier:
2 x 30W RMS; 2 x 60W continuous program
Materials:
Aluminum grille, steel brackets, ABS cabinet
Frequency range:
50Hz to 20kHz @ -10dB
Weight per single speaker:
TBD
Frequency response:
90Hz to 20kHz @ ±3dB
Weight with mounting kit:
TBD
Woofer:
5 1/4” polypropylene cone with rubber edge woofer
Shipping weight (for pair):
7.2 kg
Tweeter
1" Titanium dome tweeter ( Waveguide 90°x90°)
Dimensions (WxDxH):
19.2 cm x 18.5 cm x 28.5 cm (7.2” x 6.7” x 9.6”)
Sensitivity:
87dB SPL, 1W@1m for 1k Hz
19.2 cm x 23.5 cm x 28.8 cm (7.2” x 6.7” x 9.6”)
Max spl:
Continuous: 102dB Peak: 105dB
Dimensions with mounting
brackets (WxDxH):
Power source:
100-240V AC 50/60Hz
Hole spacing third party
mounting brackets:
c/c 73 mm using M6 bolts
Crossover frequency:
2 kHz
Installation clearance
Directivity factor (q):
4.0 averaged 1kHz to 10kHz @ 100 Degrees
(with mounting bracket):
Front panel to wall: 24 cm (9.5in)
Back panel to wall: 4.5 cm (1.8in)
Directivity index (di):
6.0dB averaged 1kHz to 10kHz @ 100 Degrees
Included accessories:
Input connectors:
• Line level unbalanced stereo audio on a 3.5mm
TRS connector
• Line level balanced stereo audio on a terminal
block connector
• Line level unbalanced stereo audio on left and
right RCA connectors
• 1 pair of U-shaped rotating mounting brackets
• 3 m (9.84ft) power cord
• 4 m (13.12ft) loudspeaker cable
• 3 m (9.84ft) 3.5mm to 2 RCA cable
Optional accessories:
Third party mounting brackets,
fits for example K&M 24141
Colors:
Available in white or black
Compliance
CE
Environmental compliance
RoHS, WEEE
(Summed when all is connected)
Output connectors:
• Speaker (to connect to the external
passive speaker)
• 3.5mm mini jack lineout for optional sub-woofer
• 3.5mm mini jack Loop output
Damping factor:
>100 @ 8Ω/400Hz
S/n ratio:
> 83dB
Thd:
244 g
Controls:
Volume, bass and treble
Input power:
ON,OFF or AUTO
Power consumption:
0.3W (standby mode)
Inputs signal for system
≥10mV
“wake-up” from standby mode:
PACKAGE LIST
1x Active speaker
1x Passive speaker
2x U-Brackets*
1x 3m (9,84ft) Power cord (UK)*
1x 3m (9,84ft) Power cord (EU)*
1x 4m (13,12ft) Loudspeaker cable*
1x 3m (9,84ft) 3.5mm TRS to 2 RCA cable*
*White
color accessories for SPK1-AW560SP-WH, black color accessories SPK1-AW560SP-BL
SPK1-AW560SP-WH (Back)
KEY FEATURES
• Powerful 5 1/4” polypropylene cone with rubber edge woofer
• 1" Titanium dome tweeter
• Waveguide 90°x90°
• 2 x 30W RMS; 2 x 60W continuous program
• Inputs: Line level on unbalanced RCA, 3.5mm and balanced terminal block
• Outputs: Loop line output and subwoofer output on 3.5mm
• Controls: Volume, bass and treble
• Power modes: ON/OFF/AUTO*
• Modern and stylish design
• U-bracket, 3m power cord (UK and EU), 3m 3,5mm TRS to 2 RCA and
4m speaker cable included
• Hole spacing for third party mounts (2 x M6, CC 73mm)
TiGHT POLICY
Faulty product - minimal down time.
Up until six months after purchase, TiGHT AV will replace
your product in advance of return of faulty product.
Your investment - built to last.
This TiGHT AV product come with a one year limited
warranty.