Joiners-Manual-V05 Pages LR - Flipbook - Page 11
Door Hardware | Multipoint Door Locks | Helpful Information
Helping you determine whether you need left or right hand products for your project
Door Handle Handing (viewed from inside)
Keep Handing (viewed from outside)
Right-Hand Handle shown (As viewed from inside the property)
Door Handles are handed as viewed
from the inside, which hand you
would typically use to open the door.
Left
Hand
Door Hardware
Handing Information for Door Locks, Keeps & Door Handles -
Right
Hand
Handles are fixed from the inside holes are on the internal handle and
bolt through to the external handle.
Hinge Side
Internal View
Door Lock Handing (as viewed from outside)
Single Doors
Double Doors
Right-hand lock
Right-hand lock
Keep Centre Line Diagram
Stile
Left-hand lock
Left-hand lock
Centre Line Measurement of keep
i.e. 12, 22, 28 or 33mm
What are faceplate widths?
What is the backset on the lock?
Backsets on multipoint door locks are determined by the distance from the
faceplate to the centre line of the spindle or Euro cylinder, then plus 18mm
for the overall depth of the lock case. This is shown on the drawing on the
right - 45mm being the backset.
Backsets on door locks are typically available in 35mm, 45mm, 55mm
dependant on type of lock being used. Not all multipoint door locks are
available with the variations of backsets.
Typical faceplate widths are 16mm or 20mm, this is
measured across the face of the lock.
The diagrams above show typical routing detail to suit
either the 16mm or 20mm.
For detailed product drawings and routing preparation visit
our website
www.coastal-group.com
11
The PartQ Compliance System from
Coastal – a commitment to customer support
01726 871 025 | sales@coastal-group.com | www.coastal-group.com