Fluke Brochure single - Flipbook - Page 11
Fluke Networks Range
CableIQTM Qualification Tester
Fluke Networks Range
MicroScanner2
CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester
gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from
network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets
faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
Today’s communications technicians have more problems to deal with than just the cabling. They have to rule out a whole
host of cable and service issues before determining the cause of a connectivity problem. Is there telephone voltage?
What’s the polarity? Is there a switch at the far end? Is PoE available? MicroScanner2 gives technicians high power vision to
verify today’s most common voice, data, and video services.
CableIQ qualification tester’s powerful network troubleshooting capability and intuitive interface enable your front line
technicians to identify and troubleshoot a wider range of problems within your network infrastructure. Is the port active?
Are the duplex settings matched? Is it a network problem or a Ethernet cable problem? Can the Ethernet cable support the
required network bandwidth? CableIQ network cable tester is the only Ethernet cable tester that can answer all these
questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.
MicroScanner2 features built-in IntelliTone digital and analogue toning to precisely locate virtually any cable or wire pair,
regardless of work environment. Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at
switches, patch panels, or wall outlets. Or, use analogue mode on voice-grade cabling (Cat 3 and below), as well as coax,
security/alarm, and speaker wiring.
Product Description
Part Number
CIQ-100 CableIQ Main
00A-500-004-00
CIQ-100 CableIQ IT Kit
00A-500-004-05
Features & Benefits
Ordering Information
Features & Benefits
Ordering Information
Product Description
• Works on live networks to provide Ethernet switch detection
and device configuration
• Measure network capacity (10 Meg, 100 Meg, 1 Gig) to
determine support for VoIP, data and video
• Advanced troubleshooting diagnostics; insertion loss, cross
talk, noise issues
• Core troubleshooting features; length, distance to fault,
graphical wire mapping, opens, shorts, power over Ethernet
(POE) detection
• Tests all copper cabling media: twisted-pair, coax, and audio
• Locate and trace cables with digital toning technology.
Requires IntelliTone 200 Digital Probe (included with
CIQ-KIT)
Part Number
Fluke MS2-100
00A-500-004-10
Fluke MS2-Kit
00A-500-004-15
• Versiv enables users to accomplish more than ever before
with a cable tester, accelerating every step of the testing
process.
• ProjX management system eases tasks from initial set-up of
a job to system acceptance. It eliminates redundant steps,
and ensures that all tests are completed correctly the first
time, and every time.
• Taptive user interface puts advanced data analysis and easy
set-up and operation at the fingertips of technicians of all
skill levels.
• LinkWare management software provides unmatched
analysis of test results and professional test reports.
Specifications
Altitude
Specifications
Cable types supported
UTP, STP, FTP, SSTP, RG6, RG59, audio
and security
Qualification autotests
1000BASE-T, 100BASE-TX, 10BASE-T,
VoIP, 1394b S100, TELCO, Wiremap only,
Coax
Results storage
Power
Battery life
Other battery types
supported
Dimensions and weight
Up to 250 qualification test results
Battery type: 4 AA (NEDA 15A, IEC LR6)
alkaline batteries
20 hours of typical use, without backlight
4AA photo lithium, NIHM, NICAD
7in x 3.5in x 1.75in
(17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)
Monochrome liquid crystal display (LCD)
with backlight
Power source
Battery type: 2 AA (NEDA 15A, IEC LR6)
Battery life: 20 hours of typical use
Safety
Warranty
Weight
Dimensions
EMC
Operating Temperature
Storage Temperature
Tone Generator
+44 (0)1376 346 600 | sales@connectix.co.uk | www.connectixcablingsystems.com
EN 61010-1 2nd Edition
One year
0.8 lbs. (363 grams)
3 in x 6.4” x 1.4 in
(7.6 cm x 16.3 cm x 3.6 cm)
EN 61326-1
32 °F to 113 °F (0 °C to 45 °C)
-4 °F to +140 °F (-20 °C to +60 °C)
IntelliTone digital tone: [500 KHz]; analog
tones: [400Hz, 1KHz]
PoE Detection
Solicits and detects the presence of
802.3af compatible PoE devices
Operating Humidity
90 % (50 °F to 95 °F; 10 °C to 35 °C)
(%RH without condensing)
Agency Certifications
7
4000 m; Storage: 12000 m
Display
+44 (0)1376 346 600 | sales@connectix.co.uk | www.connectixcablingsystems.com
N10140 C-Tick EMC standard; FCC Part 15
Class A; CE European Union Directives
Pollution Degree 2
8