Fluke Brochure single - Flipbook - Page 6
Fluke Networks Range
CertiFiber® Pro Optical Loss Test Set
Fluke Networks Range
OptiFiber Pro® OTDR
The CertiFiber Pro Optical Loss Test Set improves the efficiency of fibre optics certification. The Taptive user interface
simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting
and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro OLTS provides merged Tier 1
(Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module
supports both singlemode and multimode and is multimode Encircled Flux compliant. Copper certification and Wi-Fi
Analysis and Ethernet troubleshooting modules are also available. Analyse test results and create professional test reports
using LinkWare Management Software.
The OptiFiber® Pro is the industry’s first OTDR built from the ground up to meet the challenges of enterprise fibre optic
infrastructures. This OTDR range elevates fibre optic testing with the industry’s only smart phone interface that turns a
technician into a fibre expert. The Data Centre OTDR configuration eliminates uncertainty and errors that occur when
testing data centre fibre. Its ultra-short dead zones enable testing of fibre patch cords in virtualised data centres.
Product Description
Features & Benefits
Ordering Information
• Versiv enables users to accomplish more than ever before
with a cable tester, accelerating every step of the testing
process.
• ProjX management system eases tasks from initial set-up of
a job to system acceptance. It eliminates redundant steps,
and ensures that all tests are completed correctly the first
time, and every time.
• Taptive user interface puts advanced data analysis and easy
set-up and operation at the fingertips of technicians of all
skill levels.
• LinkWare management software provides unmatched
analysis of test results and professional test reports.
Product Description
CFP-100-Q INTL
OFP-100-M/INTL
Part Number
00A-500-000-40
Specifications
Cable Type
Cables Included
Colour of Product
Fibre
Fibre
Yellow
Display Type
Y
LED Indicators
Y
Operating Relitive Humidity
(H-H)
Operating temperature (T-T)
Product type
Storage temperature (T-T)
Input Connector
Detector Type
Wavelengths
Power Measurement Range
Power Measurement
Uncertainty
Measurement Linearity
0-90%
-18 - 45 °C
Optical Loss Test Sets (OLTS)
-30 - 60 °C
Interchangeable connector adapter
(LC standard, SC, ST and FCoptional)
InGaAs
850 nm, 1300 nm, 1310 nm, 1550 nm
0 dBm to -65 dBm (850 nm)
0 dBm to -70 dBm (all other
wavelengths)
< +/- 5% +/- 32 pW
< ± 0.1 dB
Features & Benefits
Ordering Information
Part Number
00A-500-009-00
OFP-100-MI/INTL
00A-500-009-02
OFP-100-Q/INTL
00A-500-009-50
OFP-100-QI INTL/T
00A-500-009-52
OFP-100-QI/INTL
00A-500-009-54
OFP-100-S/INTL
00A-500-009-56
OFP-100-SI/INTL
00A-500-009-58
OFP-CFP-MI INTL
00A-500-009-60
OFP-CFP-QI INTL
00A-500-009-62
OFP-CFP-SI INTL
00A-500-009-64
OFP-DEMO-KIT
00A-500-009-66
OFPMI-MFP/INTL
00A-500-009-68
• First OTDR with a smart-phone user-interface
• Accelerate fibre certification with the fastest set-up
and trace times.
• SmartLoop™ technology enables the testing of two fibres in
a single test eliminating the need to travel to the far end of
the connection to perform tests.
• Versiv™ modular design supports copper certification, fibre
optic loss, OTDR testing and fibre end-face inspection.
• Improve resource utilization with custom configurations for
projects and users.
• Simplify use with “DataCentre OTDR™” mode and
EventMap™ view.
Specifications - Singlemode Module
Compatible fibre types
Event dead zone
Attenuation dead zone
Dynamic range
Distance measurement range
Reflectance range
1310 nm: 3.6 m, 1550 nm: 3.7 m
1310 nm: 32 dB, 1550 nm: 30 dB
130 km
1310 nm: 80 km, 1550 nm: 130 km
1310 nm: -14 dB to -65 dB
1550 nm: -14 dB to -65 dB
Sample resolution
Pulse widths (nominal)
3 cm to 400 cm
3, 10, 30, 100, 300, 1000, 3000,
10000, 20000 ns
Specifications - Multimode Module
Compatible fibre types
Event dead zone
Attenuation dead zone
Dynamic range
Max distance range setting
Distance measurement range
Reflectance range
Sample resolution
Pulse widths (nominal)
+44 (0)1376 346 600 | sales@connectix.co.uk | www.connectixcablingsystems.com
Singlemode
1310 nm: 0.6 m, 1550 nm: 0.6 m
Max distance range setting
Wavelengths
3
1310 nm +/- 25 nm
1550 nm +/- 30 nm
Wavelengths
+44 (0)1376 346 600 | sales@connectix.co.uk | www.connectixcablingsystems.com
850 nm +/- 10 nm 1
300 nm +35/-15 nm
50/125 μm, 62.5/125 μm
850 nm: 0.5 m, 1300 nm: 0.7 m
850 nm: 2.5 m, 1300 nm: 4.5 m
850 nm: 28 dB, 1300 nm: 30 dB
40 km
1310 nm: 80 km, 1550 nm: 130 km
850 nm: 9 km, 1300 nm: 35 km
3 cm to 400 cm
850 nm: 3, 5, 20, 40, 200 ns
1300 nm: 3, 5, 20, 40, 200, 1000 ns
4