ORiGINAL Brochure Edition 1 - Brought to you by DoorCo - Flipbook - Page 78
ORiGINAL 44mm Door
> Grained GRP SMC skins are available in a wide
variety of styles and colours including wood stains
> Stiles and Rails are manufactured from a
> LVL is used as the main internal reinforcement
> Skins and sub frame are bonded with a Urethane
> The door is filled with CFC-Free Polyurethane
Foam density 44.5 - 45.5kg/m3
> Superior heat and sound insulation
> Complimentary choice of grained reglazeable
> Centre Pane Value of approximately 0.44
> Doors have exceeded the requirements of PAS24
> Q-Marked with full manufacturing traceability
All the double and triple glazed units used in our doors
are manufactured to the highest standard and come with
internationally recognised accreditations for performance,
strength and thermal efficiency.
High Performance Units
All units are made with toughened glass to comply with
EN12150, the International standard for safety glass.
All units are manufactured to the EN1279 standard for
quality of seal and life expectancy and come with a
manufacturer’s 10 year warranty.
All the clear or obscure glass units in our range have
insulating features as standard. They are manufactured
using low emissivity glass and the airspace is filled with
Argon gas to give industry leading thermal efficiency.
In addition, we only use warm edge spacer systems.
Security and/or Safety Option
Most glazing options can be supplied with an upgrade
where the outer pane of toughened glass is replaced with
laminated glass which holds together when shattered.
> The door leaf should only be cleaned using warm
water or non-aggressive composite door wipes.
No solvent-based product or abrasives should be
used as these will damage the surface of the skin.
> External glass should be cleaned with warm soapy
water and cleaned with a proprietary glass cleaner.
Care and Maintenance
Your new door should keep safe and secure for years to
come however with all products and especially those that
are exposed to the elements we recommend that you carry
out a care and maintenance routine.
> Door frames should be washed with warm soapy
water, however stubborn stains can be removed
using specialist PVC-u cleaners and by following
the manufacturers’ guidelines.
> Hardware can be cleaned with a mild detergent and
wiped clean. No harsh chemicals or abrasives should
> Maintenance of the door may be required to maintain
any guarantees from the installer. Hinges should be
lubricated with engineering oil. Cylinders can be
lubricated with Teflon-based products only, as other
oils may cause degradation. If necessary, a small
amount of lubricant can be applied to the moving
parts such as letterplates, handles and knockers.