LGH User Guide 2018 UK 2nd Edition - Page 83



Modulift Spreader Beams
MOD 70H Spreader Beams
• Rated at 100t SWL at 8.5m span (30° STV)
• ‘Sling to Vertical’ angle, 45º or less
• End Units and Drop Links are rated at 50t WLL each
Please refer to the table below for load ratings at alternative sling
to vertical (STV) angles and beam lengths.
Span
(m)
MOD 70H
Sling to Vertical Angle (STV)
30º
Min. Top Sling Length (m)
SWL (t)
20º
Min. Top Sling Length (m)
SWL (t)
Min. Top Sling Length (m)
1.0
100
0.4
100
0.7
100
1.1
1.5
100
0.7
100
1.2
100
1.9
2.0
100
1.1
100
1.7
100
2.6
2.5
100
1.4
100
2.2
100
3.3
3.0
100
1.8
100
2.7
100
4.1
3.5
100
2.2
100
3.2
100
4.8
4.0
100
2.5
100
3.7
100
5.5
4.5
100
2.9
100
4.2
100
6.3
5.0
100
3.2
100
4.7
100
7.0
5.5
100
3.6
100
5.2
100
7.7
6.0
100
3.9
100
5.7
100
8.5
6.5
96
4.3
100
6.2
100
9.2
7.0
86
4.6
100
6.7
100
9.9
7.5
77
5.0
100
7.2
100
10.6
8.0
68
5.3
100
7.7
100
11.4
8.5
61
5.7
100
8.2
100
12.1
12.8
9.0
55
6.0
96
8.7
100
9.5
49
6.4
86
9.2
100
13.6
10.0
44
6.8
78
9.7
100
14.3
11.0
36
7.5
64
10.7
100
15.8
12.0
29
8.2
49
11.7
83
17.2
13.0
24
8.9
43
12.7
69
18.7
14.0
20
9.6
36
57
20.1
MOD 70H
Product Code
Model
Description
Weight item (kg)
H050221000
H050231000
P1
End Unit
58
P2
Drop Link
32
H050250709
P3
4.0m Strut
240
H050250708
P4
2.0m Strut
136
H050250706
P5
1.0m Strut
85
H050250703
P6
0.5m Strut
61
H550210850
P7
85t Safety Shackle
62
H550210550
P8
55t Safety Shackle
40
P9
User Instructions
MOD 70H
13.7
RIGGING
45º
SWL (t)
The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and
erent spans.
MOD 70H has an assembled span ranging from 1 metre to 14 metres in 0.5 metre increments.
Fig. 1 – Typical Spreader Assembly
β
P7
β = Sling to vertical angle
P8
P1
P3–P6
P9
P2
Span
Larger shackle Table 1 – Component List
Part Ref.
Description
Weight/item
P1
End Unit
58kg
P2
Drop Link
32kg
P3
4.0m Strut
240kg
Drop link
P4
2.0m Strut
136kg
Smaller shackle
P5
1.0m Strut
85kg
End unit sub-assy
P6
0.5m Strut
61kg
P7
85t Shackle
62kg
M20 x 65, Grade 8.8 HT Bolts, Nuts & Washers
Strut
Drop link
cation
P8
55t Shackle
40kg
(30° STV). See Load Table for SWL at longer spans.
M20 x 65, Grade 8.8 HT Bolts, Nuts & Washers
P9
‘Sling to Vertical’ angle, β, 45 degrees or less.
End Units & Drop Links are rated at 50 tonnes WLL each (100 tonnes combined capacity).
Bolt tightening torque: 150Nm. Spanner size required: 30mm.
Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner.
Rated at 100 tonnes SWL at 8.5 metres span




www.lgh.co.uk | 03704 247 247
WARNING!
Personnel using this system should be suitably trained, competent and have a clear
83





Powered by


Full screen Click to read
Paperturn flip book
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen