THE ABIMIG BASICS 2018 Product Catalogue - Page 24



Manual Torch Liners
PVC Coated
We strongly recommend the use of Combi versions in manual
torches to increase performance, extend the life of the liner &
prevent the liner from melting in the torch neck.
ABIMIG® A / A T / EVO / W
Colour
Diameter Ø
0.6 - 0.8 mm
1.0 - 1.2 mm
1.4 - 1.6 mm
3 Metre
124.0011
124.0026
124.0041
PVC Coated (ABIMIG® 455)
4 Metre
124.0012
124.0031
124.0042
5 Metre
124.0015
124.0035
124.0044
Diameter Ø
1.0 - 1.2 mm
1.4 - 1.6 mm
PTFE
3 Metre
124.D094
124.D044
4 Metre
124.D095
124.D044
5 Metre
124.D096
124.D044
Recommended for low heat applications in air cooled torches. They can be used on higher heat
applications when used with a liquid cooled torch and a brass neck liner.
ABIMIG® A / A T / EVO / W
Colour
Diameter Ø
0.6 - 0.8 mm
1.0 - 1.2 mm
1.4 - 1.6 mm
Combi-PTFE
3 Metre
126.0005
126.0021
126.0039
4 Metre
126.0008
126.0026
126.0042
5 Metre
126.0011
126.0028
126.0045
The addition of a short brass spiral wound liner attached to the front of the PTFE liner enables this liner
to be used in higher temperature applications.
ABIMIG® A / A T / EVO / W
Colour
Diameter Ø
0.6 - 0.8 mm
1.0 - 1.2 mm
1.4 - 1.6 mm
Carbon PTFE
3 Metre
126.M002
126.M006
126.M009
4 Metre
126.M003
126.M007
126.M010
5 Metre
126.M008
126.M011
Designed for wires that are difficult to feed (e.g. stainless & nickel) due to either the composition of
the wire (soft) or the outside characteristics of the wire. The PTFE material is impregnated with carbon
leading to better wear characteristics compared to other plastic liners.
ABIMIG® A / A T / EVO
Colour
Diameter Ø
0.6 - 0.8 mm
1.0 - 1.2 mm
1.4 - 1.6 mm
Combi-Carbon PTFE
3 Metre
127.0002
127.0005
127.0010
4 Metre
127.0003
127.0007
127.0012
5 Metre
127.0004
127.0008
127.0013
Same as the Carbon PTFE liner but with the addition of a short brass spiral wound liner attached to
the front enables it to be used in higher temperature applications.
ABIMIG A / A T / EVO
®
Colour
Diameter Ø
1.0 - 1.2 mm
Polyamide (PA)
3 Metre
127.M006
4 Metre
127.M007
5 Metre
127.M008
Designed to be used in low temperature applications in a variety of wire types. It is a low cost
alternative and a good choice for low duty cycle air-cooled, Push-Pull applications.
ABIMIG® A / A T / EVO
Colour
Diameter Ø
1.0 - 1.2 mm
1.4 - 1.6 mm
Combi-PA
3 Metre
128.0012
128.0020
4 Metre
128.0015
128.0021
5 Metre
128.0016
128.0030
The addition of a short brass spiral wound liner attached to the front enables this liner to be used in
higher temperature applications. The brass part aids in transferring current to the weld wire, and for
this reason, Combi-PA liners are often used with soft wires (Aluminium).
ABIMIG® A / A T / EVO / W
Colour
Diameter Ø
1.0 - 1.2 mm
24
3 Metre
128.M002
Air or Liquid
Cooled
Low or High
Temp
Hard Wires
Air Cooled
ABIMIG® A T / EVO
Colour
Recommended for:
4 Metre
128.M003
Included in the standard equipment fitted to complete torches (ABIMIG® A / AT /
EVO 255,255) & (ABIMIG W 340,440,540,555)
5 Metre
128.M004
High Temp
Hard Wires
Air or Liquid
Cooled
Low Temp
Soft Wires
Air or Liquid
Cooled
High Temp
Soft Wires
Air Cooled
Low or High
Temp
Soft or Hard
Wires
Air Cooled
High Temp
Soft or Hard
Wires
Air Cooled
Low Temp
Soft Wires
Air or Liquid
Cooled
High Temp
Soft Wires
Included in the standard equipment fitted to complete torches (ABIMIG® 455)

Paperturn



Powered by


Full screen Click to read
Paperturn flipbook system
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen