ABICOR BINZEL UK | PRODUCT CATALOGUE V1.0 - Catalog - Page 35
MIG/MAG MANUAL WELDING TORCHES
PUSH-PULL PLUS
The perfect wire feed...
MIG/MAG
up to
400 A
The welding torches of the Push-Pull Plus series, specially developed for aluminum welding require-ments
and the use of thin wires, makes problem-free and
consistent wire feed and constant wire feed possible,
even with longer cable assemblies. A powerful, sturdy pull motor with potentiometer guarantees exact
speed regulation. For an optimum wire feed without
frictional loss, the contact pressure of the feeding rollers can be regulated precisely and easily directly on
the handle. The ergonomic handle ensures optimum,
low-fatigue handling.
The screw-type torch necks can be replaced quickly.
They are available as either straight or 45° angled
versions. A special interface between the handle and
the torch neck makes it possible to turn the necks up
to 360°. All torches, both air and liquid-cooled for
capacities of up to 400 A, are based on the tried-andtrusted “MB” torch neck design.
Easy access due
to lift-up cover
Insulated
counter-press roll
The main areas of application for these welding
torches include wharfs, manufacturers of containers
and ships etc., as well as in vehicle and wagon building. Wherever exact and constant wire feeding is an
absolute must.
Screwable interface between
swan neck and torch body
Simple setting of the
contactpressure by
knurled screw
Standard ‘MB’ consumables
Proven “MB” wear parts
Ratings
Torch Type
Cooling
Push-Pull Plus 36 D
Push-Pull Plus 401 D
CO2
Mixed
Gas M21*
Duty
Cycle
Wire Ø
(mm)
Pages
300 A
400 A
270 A
350 A
60%
100%
0.8 - 1.2
0.8 - 1.2
36 - 37
38 - 39
* according to DIN EN ISO 14175
Air Cooled
Liquid Cooled
35