2020 catalogue FSP - Page 101



XPANDER WIRELESS SYSTEM
APOLLO XPANDER RANGE
Sourced from UK based world leaders in detection, we offer competitive prices
with many items in stock.
WIRELESS SYSTEMS
Analogue addressable fire alarm systems have been in use for many years and have
proven their worth in countless installations. Apollo Fire Detectors’ wired systems
comprises not only detectors and manual call points but also interfaces, sounders,
beacons and special detectors such as beam and flame detectors.
Wireless systems are often installed in buildings where wiring presents a challenge, most
often because the fabric of the building or its design will be negatively affected by the use
of cables. It is sometimes very difficult to introduce cable runs into buildings which were
not designed for the modern age. It may also be that a collection of buildings, such as an
open air museum, requires fire protection but is not suitable for normal wired systems.
It is for buildings of this kind that XPander has been developed. XPander is a wireless
extension to a loop-wired SP95 or Discovery detection and alarm system. XPander is a
system in which individual detectors, call points and alarm devices communicate with
the Apollo addressable loop by radio signals. An interface is connected to the loop in the
same way as any other interface, such as an Input/Output Unit. Every XPander device is
assigned an address and this address is recognised by the control panel in the same way
as is the address of any device connected directly to the loop wiring. It should be noted
that not all installations can be extended by using XPander and it is essential that a site
survey is conducted to check whether XPander can be installed or not.
FIREBEAM SMOKE DETECTORS
The FIREBEAM reflective optical beam smoke detector with a motorised head , can align itself when commissioning, and
continually corrects itself against building movement. It can also be controlled and adjusted from ground level. The system
consists of a motorised head unit, which contains an infra-red transmitter and receiver, a ground level controller and a prism
reflector. The motorised head sends out the infra-red beam on to the prism reflector which returns the beam to the receiver,
this analyses it for smoke contamination and registers a fire condition at a pre determined level. At ground level the controller
unit is used to make operational adjustments. There are 3 kits available, 5 - 40Metre, 40-80Metre and 80-100Metre.
FBM100
CODE
PART NO.
DESCRIPTION
127-1217
XPA-CB-14016-APO
XPander combined sounder and optical detector
127-1218
XPA-CB-14020-APO
XPander Sounder Visual Indicator (red) and Optical Smoke Detector
127-1219
XPA-CB-11170-APO
XPander A1R heat detector and mounting base
127-1220
XPA-CB-11171-APO
XPander CS heat detector and mounting base
127-1221
XPA-CB-14011-APO
XPander single channel input/output unit
127-1222
XPA-CB-14012-APO
XPander dual channel input/output unit
127-1223
XPA-CB-14050-APO
XPander 868MHz diversity interface module
127-1224
XPA-CB-14006-APO
XPander manual callpoint integral radio base
127-1225
XPA-CB-12034-APO
XPander optical smoke detector and mounting base
127-1226
XPA-CB-14001-APO
XPander sounder with mounting base (red)
CODE
PART NO
DESCRIPTION
127-1227
XPA-CB-14003-APO
XPander Sounder Visual Indicator (red)
127-1115
FIREBEAM
Firebeam standard kit including Controller and 1 reflector covering 5-40Metre
127-1228
29600-413
Blank XPander XPERT Card (White)
127-1116
40KIT80
Blank XPander XPERT Card (White)
127-1229
XPA-TE-14075-APO
XPander diversity 868MHz survey kit
127-1117
80KIT100
Firebeam Range Extension Kit 80-100M
127-1118
ADAPTER
Firebeam Head Interface Adaptor to Assist Mounting to Unistrut
127-1119
FOGKIT
Firebeam Antifog Window for Head and Single Antifog Reflector
127-1120
REFLECTOR-AF
Firebeam Single Antifog Reflector
127-1121
WINDOW-AF
Firebeam Antifog Window
127-1122
FIREBEAM-AF
Firebeam standard antifog kit
127-1123
40KIT80-AF
Firebeam Antifog Extension Kit 40-80M
127-1124
80KIT100-AF
Firebeam Antifog Extension Kit 80-100M
127-1125
FB-BRACKET
Firebeam Adjustable Wall Bracket
127-1126
PSU-FB24
Firebeam 1.5A 24V Power Supply Unit
IT IS ESSENTIAL TO HAVE A
WIRELESS SURVEY CARRIED
OUT PRIOR TO INSTALLATION.
100
FIREBEAM DETECTORS
FBM80
101





Powered by


Full screen Click to read
Paperturn flipbook viewer
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen