2020 catalogue FSP - Page 30



MOBILE FIRE EXTINGUISHERS
RAPID ACTION FIRE SUPPRESSION SYSTEMS
FIRECHIEF SUPERMIST
Though water is one of the most potent fire extinguishers
around, large quantities are required to extinguish a fire.
Harnessing water’s immense cooling power and multiplying
it hundreds of times over, Firechief’s Watermist technology
breaks water down into a fine mist of under 80 microns.
This mist is then thrown at the fire with a great kinetic force,
covering a large surface area. As soon as the mist comes into
contact with the fire, it instantly turns into steam, enveloping
the flames, cutting down the oxygen supply and reducing
the temperature to below combustion levels. Powered by
Watermist, the Firechief Supermist is unstoppable. Equipped
with four Multi-Rotors in each container, it’s fully capable of
generating Watermist quickly and efficiently. This is available
as pure Watermist or Foam mist for full risk coverage. Available
as a standalone trolley mounted in 25L, 50L and 100L capacity.
FEATURES:
Easy to use with Quick Stored Pressure Activation
Fights Class A,B,F and Electrically started fires
Tamper-proof Safety Seal
Low pressure, safe technology
Meets and conforms to international standards with
EN1866 certification pending
Controllable Discharge Mechanism with a lightweight
dual-mode gun
Long-lasting Braided Rubber Hose
Corrosion resistant Stainless Steel Body
Environmentally friendly using bio-degradable foam and/
or water to fight fires
Portable, Trolley Mounted Extinguisher
Pressure Gauge for easy checking
CODE
MODEL
DESCRIPTION
100-1444
FWM25
Firechief Supermist 25L Water Mist Extinguisher
100-1445
FWM50
Firechief Supermist 50L Water Mist Extinguisher
100-1446
FWM100
Firechief Supermist 100L Water Mist Extinguisher
100-1447
FFM25
Firechief Supermist 25L Foam Mist Extinguisher
100-1448
FFM50
Firechief Supermist 50L Foam Mist Extinguisher
100-1449
FFM100
Firechief Supermist 100L Foam Mist Extinguisher
WATER MIST
FRAS DIRECT – LOW PRESSURE
Firechief’s Direct Low Pressure Rapid Action System is ideal
for situations in which fires may break out in a localised
area or enclosed space, such as a server cabinet or electrical
panel. The key feature of this system is the specially designed
heat sensitive pneumatic polymer tubing. It is connected at
one end to a Firechief extinguishing agent container, while
the rest of it runs unobtrusively throughout the area at risk.
FOAM MIST
When the flame comes in contact with the heat-sensitive
tubing or the ambient temperature reaches 150-180ºC, the
tubing bursts open at that exact spot where heat is highest
and forms a miniature nozzle. The pneumatic mechanism
triggers the valve of the extinguisher and sprays the
extinguishing agent out of the tube directly onto the flame,
dousing the fire instantaneously. Because the extinguishing
agent used is a clean agent, this system is effective to
combat any kind of fire.
The Direct System is designed by the Firechief Design Team
and installed by Firechief’s expert team after an assessment
of the location. The most suitable option can be installed
based on the assessment and requirements of the location.
FIRE SUPPRESSION SYSTEM
Features:
Direct System: The heat–sensitive tubing acts as an
extinguishing agent delivery system. When a fire is detected, the
tube bursts at that point, forms a miniature nozzle and sprays the
extinguishing agent.
Low Pressure: For extinguishing effectiveness
with minimised collateral damage.
International Quality: Built to Firechief’s high standards, which
comply with international quality standards.
Self-contained: Does not require a power supply and will
function normally in the event of a power outage.
Instant activation: Eliminates the need for human intervention,
the system is ready to combat a fire as soon as it breaks out.
Flexible Application: Uses clean agent gas extinguishing agent
FE36TM, HFC227en or HCFC123 extinguishing agent, making
this system useful for a multitude of applications.
Extended Reach: Flexible tubing extends protection to areas that
are difficult to access and may not be able to accommodate any
other means of detection.
Easy Installation: Simple design, and can be installed within a
few hours, which means a significant reduction in labour costs
and downtime.
Rugged quality: Ensures tolerance to harsh conditions where
other types of detection systems might be rendered inadequate.
Firechief Direct Low Pressure
Rapid Action System is available
in 2kg, 4kg, 6kg, 9kg sizes
to suit all applications
30
Swift and Comprehensive: Running intricately and unobtrusively
through servers, genset and electrical mains boxes,
the system can be triggered instantly and automatically. This
eliminates the need for human intervention and provides a swift
and comprehensive solution.
Mechanism and Indicator: Used / Unused Mechanism and Used
/ Unused Indicator keeps track of usage and ensures there are no
unpleasant surprises during an emergency.
31





Powered by


Full screen Click to read
Paperturn flipbook viewer
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen