2020 catalogue FSP - Page 94



XP95 ADDRESSABLE ACCESSORIES
XP95 ADDRESSABLE SOUNDERS & BEACONS
APOLLO XP95 INTERFACES
APOLLO XP95 LOOP POWERED
SOUNDERS & BEACONS
127-1244
The switch monitor plus is designed to monitor the state of one or more single
pole, volt-free contacts connected on a single pair of cables and to report the status
to Apollo compatible analogue control equipment. It has an output for resetting a
remote detector, four input states-‘normal’, ‘fault’, ‘pre-alarm’, and ‘alarm’. It also
features two visible LED’s and selectable alarm delay for monitoring flow switches.
APOLLO LOOP POWERED OPEN AREA SOUNDERS/ BEACONS
Choice of tones includes Apollo, Slow Whoop and Din
127-1245
Fully synchronised
This is a simplified version of the input/output unit without circuitry for monitoring
inputs. It provides a volt-free single pole, changeover relay output. Capable of
switching 30V at 1A
92-100 dB range on sounders
127-1246
The mains switching Input/Output unit provides a volt-free, single pole changeover
relay output and a monitored switch input. Having three visible LED’s, it is capable of
switching 250V AC at up to 5A. It can supervise one or more normally-open switches
connected to a single pair of cables.
CODE
PART NO.
DESCRIPTION
127-1244
SA4700-100APO
Intelligent Switch Monitor Unit
127-1245
SA4700-102APO
Intelligent Input/Output Unit
127-1246
SA4700-103APO
Intelligent Mains Switching Input/Output Unit
APOLLO RESETTABLE
CALLPOINTS
58100-908/APO
94
55100-905/APO
XP95 Flush-Surface Mountable/Resettable Call Point
127-1135
55100-908/APO
XP95 Flush-Surface Resettable Call Point C/W Isolator
127-1060
55000-274APO
P95 Multi-tone Weatherproof Open-area
Sounder Red, IP66 Rated
127-1061
55000-009APO
XP95 Intelligent Open-area
Beacon Red
127-1062
55000-005APO
XP95 Intelligent Open-area Sounder Beacon
Red
127-1063
55000-291APO
XP95 Multi-tone Open area Sounder Beacon
Red
127-1064
55000-293APO
XP95 Multi-tone Open-area Sounder Beacon
Red
127-1065
55000-296APO
XP95 Multi-tone Weatherproof Open-area
Sounder Beacon Red
127-1066
55000-298APO
XP95 Multi-tone Weatherproof Open-area
Sounder Beacon Red
Unique self test
Compatible with Discovery & XP95
127-1134
XP95 Intelligent Open-area Sounder Red,
IP65 Rated
Synchronisation of visual indicator flash
Resettable element
Discovery Manual Call Point with Isolator Red Surface
55000-001APO
Synchronisation of ‘alert’ and ‘evacuate’ tones on sounder version
Reports an alarm in under 0.2 seconds
58100-908/APO
127-1059
Flash rate of 0.5Hz
Continuity link for wiring test before commissioning
127-1214
XP95 Multi-tone Open-area Sounder Red,
IP21C Rated
EN54-23 approved
Needs 'Plug and Play’ terminal connections for fast wiring
DESCRIPTION
DESCRIPTION
55000-278APO
APOLLO PART 23 APPROVED VISUAL ALARM DEVICES (VAD’S)
Flashing LED option to indicate polling (Discovery systems only)
PART NO.
PART NO.
127-1058
APOLLO XP95 VADS
A seven-segment DIL switch enables addressing of each call point at commissioning
stage. When operated, the manual call point interrupts the polling cycle for a fast
response. Bi-coloured LEDs indicate isolate and normal conditions.
CODE
CODE
Individual and group addressing
CODE
PART NO.
DESCRIPTION
127-1067
45681-709APO
XP95 Addressable VAD Detector Base
c/w Isolator
127-1068
45681-700APO
XP95 Addressable VAD Detector
Sounder Base c/w Isolator
95





Powered by


Full screen Click to read
Paperturn flipbook viewer
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen