SMI catalogue 2022 - Catalog - Page 85
SAFETY FOOTWEAR
HEX PATTERN FOR
WATER DISPERSAL
LADDER GRIPS GRIP
WHEN WORKING AT HEIGHT
7° HEEL STRIKE
SLIP PREVENTION & BRAKING
We designed our hex grip pattern to cut through water and
quickly channel it away, ensuring wearers are always in
contact with the ground and avoid slipping up even in the
wettest conditions
Falls from height account for more than a quarter of all fatal
injuries in the work place. This is why the IGS has a deep
ladder grip that complies with Firefighter boot standards,
which is over and above safety boot requirements
Slips are most likely to happen when the heel is placed
down to make a new step, which is why we have designed
the heel strike at 7º, the angle at which most slips occur.
Angled splines provide increased contact with the ground,
effortlessly cutting through water or dirt at
every step.
LADDER GRIPS GRIP
WHEN WORKING AT HEIGHT
7 ° HEEL STRIKE
SLIP PREVENTION & BRAKING
SOLE PATTERN
TO PREVENT CLOGGING
Falls from height account for more than a quarter of all fatal
injuries in the work place. This is why the STS has a deep
ladder grip that complies with Firefighter boot standards,
which is over and above safety boot requirements
Slips are most likely to happen when the heel is placed down
to make a new step, which is why we have designed the heel
strike at 7º, the angle at which most slips occur. Angled splines
provide increased contact with the ground, effortlessly cutting
through water or dirt at every step.
Inspired by tractor tyre technology, the large lugs are
designed to provide both backwards and forwards traction
on loose surfaces, as well as being SRC compliant. The sole is
self-cleaning with large angled channels to
prevent clogging.
smigroupuk.com | hello@smigroupuk.com | 01428 658333
85