Chevy-EMS-Catalog-final - Flipbook - Page 3
248-546-0232
MasterCard
1935-36
Chevrolet
FIREWALLS
VISA
®
®
DISCOVER
®
CARD
1935-36
TRUNK FLOOR
The Trunk Floors on these
wonderful old Chevy's
often rust out. EMS
Automotive has
developed a Trunk Floor
Repair Kit. Made in the
U.S.A., designed as Street
Rod Style, these kits are
easy to install and use
heavy 18 gauge steel. These Trunk Floor Kits include the Main
Trunk Floor sections and the Riser Over The Axle section.
Will not fit 1935 Standard models.
Our Firewalls are precision
manufactured in the USA
from high grade steel and
are designed for the most
common application: Chevy
350SB, 350TH, or Big Block
396-454 with Turbo 400.
Other combinations usually
work well with this design.
1935-36 Chevrolet Fully Finished Firewall Kits for
Small Block ................................................................ P/N: CV144
Big Block .................................................................... P/N: CV145
1935-36 Chevrolet Trunk Floor Kits - Street Rod Style
1935 Master - 1936 Coupe .............................................. P/N: 99
1935 Master - 1936 Sedan ............................................... P/N: 70
FRONT FLOOR PANS
Street Rod Style
The Front Floor Pan Kit will
replace the floor pan from
the firewall to just under the
front part edge of the front
seat. For the 1935-36
Chevrolet, our Floor Pan Kit
will replace the original
damaged floor pan with steel
to provide a better, stronger floor and better seal against noise
and exhaust fumes. It will extend from side to side and will include
part of the drive shaft tunnel. Each of our kits comes with a transmission cover, enlarged to accommodate the newer automatic
transmissions, and can be bolted or welded in place. All kits are
made of 16 gauge steel and have high quality reinforcement bead
for strength. Each kit is made to match the set-back of the firewall.
Fits all body styles except 1935 Chevrolet Standard models.
REAR FLOOR PANS
The Rear Floor Pan Kit will
replace the area from the
end of the Front Floor Pan
and continue rearward to
the Riser Over The Axle.
Extends completely from
side to side. Made from
heavy 18 gauge steel and
is formed with high quality
ribs for strength. Made in the U.S.A.
For Coupes with Rumble Seats, the Rumble Seat Riser will also be
required.
1935-36 Chevrolet Rear Floor Pan Kits
1935 Master, 1936 Master ............................................... P/N: 81
1936 Sedan Standard ....................................................... P/N: 80
1935 Master Coupe, 1936 Coupe ................................... P/N: 161
1936 Standard Coupe ....................................................... P/N: 283
1935-36 Chevrolet Rumble Seat Riser
1935 Master - 1936 Coupe .............................................. P/N: 155
1935-36 Chevrolet Floor Pans (made to fit)
Stock Firewall ................................................................... P/N: 552
Small Block Firewall ........................................................ P/N: 553
Big Block Firewall ............................................................ P/N: 554
TRANSMISSION COVER
RUNNING BOARDS
Extra Clearance Style
For use with the stock firewall and
floorpan. Will replace the stock
transmission cover with a new cover
that will provide plenty of extra room
for the newer automatic
transmission. Easy installation.
Made of 18 gauge steel.
Smooth Running Boards,
fabricated from 18 gauge
steel. Paint them the same
body color or cover with
favorite material. Fits all
body styles. Sold by the pair.
1935 Master, 1936 Master ................................................. P/N: 586
1936 Standard (shown above) ............................................. P/N: 587
1935-36 Chevrolet Transmission Cover ....................... P/N: CV149
29
99911 Chev - Rev. 3 - 3/17