Chevy-EMS-Catalog-final - Page 8



248-546-0232
MasterCard
VISA
®
®
DISCOVER
®
CARD
1940
Chevrolet
REAR FLOOR PANS
FIREWALLS
This Rear Floor Kit will repair
the Floor Pan area in the
passenger compartment
behind the front seat. It
extends from the Front Floor
Kit and continues rearward
under the rear seat and then
begins to climb over the rear
axle where it will meet with
the Trunk Floor Kit.
Made of heavy 18 gauge steel, contains many pieces including the
Drive Shaft Tunnel along the front half of the Riser Over The Axle
which allows the Floor Pan to be located properly.
Our Firewalls are precision
manu-factured in the USA
from high grade steel and
are designed for the most
common application.
1940 Chevrolet Fully Finished Firewall Kits for
Small Block ............................................................. P/N: B740104
Big Block .................................................................. P/N: B740106
EMS Automotive is proud of its products.
Look for our name on each part we sell.
1940
1940 Chevrolet 2 & 4dr Sedan & 2dr Coupe ................... P/N: 236
Body to Frame Pad Kit .............................................. P/N: 365369A
TRUNK FLOOR
The EMS label stands for quality.
A Street Rod Style Trunk
Floor will fit all 2 & 4dr
Sedan and 2dr Coupes.
Will work with OEM Style
Trunk Floor Extension for
easy installation. Includes
left & right Main Trunk
Floor Pans and the rear
half of the Riser Over The
Axle. 18 gauge steel. Ships rust free in a protective container.
TRANSMISSION COVER
Extra Clearance Style
For use with the stock firewall and
floorpan. Replaces the stock transmission cover and provides plenty of
extra room for the newer automatic
transmission. Made of 18 gauge steel.
1940 Chevrolet 2 & 4dr Sedan & 2dr Coupe .................. P/N: 237
1940 Chevrolet Transmission Cover ......................... P/N: B740100
REPLACEMENT DOOR BOTTOMS® by EMS
FRONT FLOOR PANS
Since steel doors are hard to find, the proper repair can be easily
done with an EMS Door Bottom Kit which includes two pieces - the
Outer Door Skin and the Inner Structure.
The Outer Door Skin is precision die-stamped from 20 gauge steel
with all the proper curves and shapes. The hem flange on the outer
skin is included for proper assembly to the inner door structure.
The Inner Door
Includes Inner Structure too!
Structure is a one
piece die-stamped
section from 18
gauge steel with all
the proper steps for
the door jamb. Cross
braces and other
features from original
Outer Skin
doors are included.
All of our 1940 Chevrolet Floor
Pans are built in sections for ease
of installation and will fit all Firewall
setbacks. The main Floor Pans are
16 gauge steel, all other brackets &
parts are 18 gauge. Another one of
our great ideas is that we did away
with many of the lumps and divots
of the OEM floor allowing for a superior seat installation. The Front Floor
Pan section extends from the Firewall to the front seat. The Floor Pans for
the 2 & 4-door Sedans come in 4 major sections (including Trunk Floor)
to repair the area from the Firewall to the rear of the car.
1940 Chevrolet Front Floor Pans for
Stock Firewall ................................................................... P/N: 528
Small Block ...................................................................... P/N: 506
Big Block ......................................................................... P/N: 507
Body to Frame Pad Kit ........................................... P/N: 365369A
1940 Chevrolet 2dr Sedan & Coupe...................................P/N: 124
34
99911 Chev - Rev. 3 - 3/17





Powered by


Full screen Click to read
Paperturn flip book system
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen