Ford-EMS-Catalog - Flipbook - Page 5
248-546-0232
MasterCard
VISA
®
®
DISCOVER
®
CARD
Ford
1937-40
1937-40
OUTER BODY SHEETMETAL
COWL PANELS
QUARTER PANELS
All Lower Front Cowls are die-stamped to factory shapes and
curves from 18 gauge steel and are high enough to include the
complete Front Fender bolt pattern area. Fits completely from the
firewall to the front door post. The lower door post pillar is included
with a formed hinge pocket. Made in USA. Specify left or right.
The Lower Rear Quarter Panel repairs the area from the front
door to the rear fender and is precision die stamped to the correct
shapes and curves from 18 gauge steel. Includes the rear door
post (door jamb). Rolls under to the spot weld seam. A very high
quality part for the best fit! Made in USA. Specify left or right.
our
1937-38 Ford All body styles,
1939 Standard ........... P/N: 147
ct
rre ur
Coonto
C
t Cont
Correc
Made
in
USA
1939 Ford Deluxe,
1940 All body styles .... P/N: 165
The Inner Cowl Structure fits behind the outer lower cowl skin.
Usually required for proper repair of the lower cowl. 18 gauge steel.
1937-40 Ford Inner Cowl Structure .................................. P/N: 148
1937-40 Ford 2dr Sedans (long door), Cabriolet & Club Coupe ... P/N: 170
1937-40 Ford Coupe (short door), Business Coupe ..................... P/N: 171
ROCKER PANELS
REAR EXTENSION
Well made, finely detailed,
one-piece, die stamped 20
gauge steel. Duplicates the
shapes and curves of the
factory Rocker Panel.
Extends from door post to
door post. Fits all 2Dr Sedans and Coupes. Will work on front door of the 4Dr Sedan.
1937-40 Ford Rocker Panels (sold in pairs) ................................................. P/N: 109
Extends the standard OEM Rocker from the rear
door post on a 2 door car back to the inner
wheel well. Fits all body styles including 4 door,
Coupes and Sedan delivery.
1937-40 Ford Rocker Panel
Rear Extension .................................... P/N: 342
FLOOR PANS - FRONT & REAR
1937-40 Ford Ford Front Floor Pans
(Made to fit)
Stock Firewall ...................... P/N: 233
Small Block Firewall ............ P/N: 153
Big Block Firewall ................ P/N: 234
1937 - 1940 Ford Front Floor Pans - Street Rod Style Fits All Body Styles
The Front Floor Pan kit will replace the floor pan from the firewall to just under the front part edge of
the front seat. Our Floor Pan kit will replace the original wood floor boards with steel to provide a
better, stronger floor and a better seal against noise and exhaust fumes. It will extend from side to side
and will include part of the drive shaft tunnel. Each of our kits comes with a die-stamped transmission
cover, enlarged to accommodate the newer automatic transmissions, and can be bolted or welded in
place. All kits are made of 18 gauge steel and have a quality reinforcement bead for strength. Each kit
is made to match the set-back of the firewall. Use the universal if you made a custom firewall or have a
custom application. If your floor is very rusty, new rocker panels may be needed.
1937 - 1940 Ford Rear Floor Pans - Street Rod Style
The Rear Floor Pan kit will replace the rear floor pan
section in the passenger compartment. It will start at
about the front of the front seat and go back to the riser
over the axle. It will extend from side to side and will include the drive shaft tunnel. Made of 18
gauge steel and has a quality made stiffener bead for a strong floor. Fits all 2 & 4 Door Sedans,
Coupes & Cabriolets. Inquire on Sedan Delivery.
1937-40 Ford ........ P/N: 150
4
98150 Ford - Rev. 1 -3/17