Cleco 2019 Digital Catalog - Flipbook - Page 131
Air Motors
21 Series - Air Motor - Rotary Vane - Side
Exhaust
Maximum Power 0.3 hp | 0.22 kw
• Maximum
Power 0.3 hp | 0.22 kw
Range 0.2 - 15.2 ft. lbs. | 0.27 - 20.6 Nm
• Non-Reversible
• Side Exhaust
• Torque
MODEL
MOUNT
SPINDLE TYPE
RPM AT
MAX HP
FREE
SPEED
TORQUE
STALL
R/MIN
R/MIN
FT LB | NM
GEAR
RATIO
LENGTH
HORSEPOWER
AIR CONSUMPTION
IN | MM
HP
SCFM
CONTROL
21M1000-49
FLANGE AND BASE
MOUNTING
3/8 IN KEYED SPINDLE
190
380
15.2 | 20.6
68.9-1
5.66 | 144
0.3
12
NON-REVERSIBLE
21M1002-49
FLANGE AND BASE
MOUNTING
3/8 IN KEYED SPINDLE
450
900
6.4 | 8.67
29.1-1
5.66 | 144
0.3
12
NON-REVERSIBLE
21-1900-49
ROUND
3/8 IN KEYED SPINDLE
15000
30000
0.2 | 0.27
1-1
3 | 76.2
0.3
12
NON-REVERSIBLE
21M1300-49
FLANGE AND BASE
MOUNTING
3/8 IN KEYED SPINDLE
1600
3200
1.8 | 2.44
8.3-1
4.34 | 110
0.3
12
NON-REVERSIBLE
Air Inlet: 1/4” NPT – Side and rear
All tools performance rated @ 90psi (620 kPa) air pressure.
*Optional Terminations:
Replace -49 in model number with the desired termination when ordering.
-38 0”-1/4” Capacity Drill Chuck (5000 RPM or less)
-51 1/16”-3/8” Capacity Drill Chuck (5000 RPM or less)
-40 3/8”-24 Threaded Spindle
-01 Series 200 Collet Chuck (for milling and routing)
-36 Series 300 Collet Chuck (for milling and routing)
Standard Equipment:
Hex socket screw provided for closure of unused inlet. Flush fitting for lubrication of gears. Wrench for threaded spindle and collet chuck models. 1/4” collet included with series 200 & 300 collet
chuck.
Optional Equipment:
Any series 200 collet may be substituted at no additional cost. On series 300 collet chuck, collets 301, 302, and 303 are available at extra cost.
**Please visit clecotools.com for dimensional diagrams and power curves.
Air Motors
CLECOTOOLS.COM
131