Cleco 2019 Digital Catalog - Flipbook - Page 223
Specialty Tools
Router Guides For Router Bits with 3/8”
Shanks
• For
use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
minimum router bit length (OAL) to be used is determined by the
formula: OAL = 1-13/16”+C+P (series 12-10); OAL = 2”+C+P (series
12-20 & 12-25). “C” is the “C” dimension of the router guide and “P” is
the desired protrusion of the router bit.
• Important: Insert bit into collet as far as possible, then pull out 1/16”
and tighten collet.
• In an emergency, if it is necessary to pull out the bit more than 1/4”, be
sure to insert a short length of blank shank (not to exceed 5/8” long) in
the bottom of the collet before inserting the bit.
• The
DIMENSION B
DIMENSION C
DIMENSION D
DESCRIPTION
IN
IN
IN
IN
14-2240
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
3/8
3/8
1/8
14-2243
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
5/8
3/8
1/8
14-2531
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
1/2
3/8
1/8
14-2538
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
1/2
1/2
1/8
14-2539
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
1/2
5/8
1/8
14-2540
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
9/16
3/8
1/8
14-2541
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
9/16
1/2
1/8
14-2542
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
9/16
5/8
1/8
14-2544
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
5/8
5/8
1/8
14-2630
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
9/16
1/2
1/8
14-2631
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
5/8
5/8
1/8
14-2632
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
1/2
1/2
1/8
14-2633
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
1/2
5/8
1/8
14-2634
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
9/16
3/8
1/8
14-2635
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
9/16
5/8
1/8
14-2636
FOR ROUTER BITS WITH 3/8” SHANKS
2-1/2
5/8
1/2
1/8
14-2893
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
5/8
3/8
1/8
14-2925
FOR ROUTER BITS WITH 3/8” SHANKS
1-1/2
5/8
1/2
1/8
CLECOTOOLS.COM
Specialty Tools
DIMENSION A
MODEL
223