Cleco 2019 Digital Catalog - Flipbook - Page 245
Advanced Drilling
Cleco A Series: Increase productivity and
quality— decrease service and operating
costs.
The A Series is made up of two product families the compact
A2 series for holes up to ½” / 12.7mm and the robust A1
series for holes up to 1” / 25.4mm.
Developed with similar architecture, both tools offer a wide
range of speeds and feeds to optimize the drilling process
with governed turbine and vane motor options that minimize
speed drop for consistent hole quality and cycle time.
Tools can produce a drilled and 100% countersunk hole
including chip fragmentation when drilling using proven
Mitis™ technology.
Design features such as easy access feed gear and Mitis™,
self-contained bearings, captive O rings, external grease
ports and shear pin, non-impact retract clutch enable up to
500 hours or 100k cycles between preventative maintenance.
Configured A Series solutions provide an
optimized solution for your needs.
The A Series tools offer a wide range of configuration options
to ensure you get the solution you need.
Standard fixturing options for twist lock / ¼” turn mounting
with and without vacuum; concentric collet mounting for
smaller holes in both right angle and in-line/pistol grip
configuration; a template foot solution for lower fixturing costs
for both horizontal and vertical operation. Additional add on
options such as cutters, cutter lubrication, cycle counter for
cutter and maintenance monitoring allow additional process
improvement.
CLECOTOOLS.COM
245