Cleco 2019 Digital Catalog - Flipbook - Page 275
Hand Drilling, Countersinking & Spotfacing
TULMan Electronic Counter
Cycle or Run Time Counter for Small Pneumatic Tools Up to 20cfm /
570 lpm
• First
ever odometer and tripometer for small pneumatic tools
on any small pneumatic device with suitable air flow, including
Cleco & Dotco products
• Manage tool service and tool calibration, quantify & compare tool
consumable life
• Monitor workforce productivity, improve quality of product or process
and realize cost savings
• LED indicator lights blink yellow (warning) and red as cycle and run
time limits are reached.
• Easy-to-use monitoring software included
• Tamper-proof cover for micro-USB access
• Useable
240461PT
MAX PRESSURE
MAX FLOW
MIN FLOW
LB/IN² | BAR
CFM | L/MIN
CFM | L/MIN
LB
100 LB/IN² | 6.9 BAR
20 | 570
5 | 145
0.176
Hand Drilling, Countersinking & Spotfacing
MODEL
WEIGHT
Straight Shank Drill Adaptors
For use with Cleco Dotco 15LF, 15LS & 15LN right angle drills with
1/4”-28 spindles.
• For
use on Cleco 15LF, 15LS & 15LN right angle drills
1/4”-28 output to collet/chuck for straight shank drills
• Adapts
MODEL
DESCRIPTION
SHANK DIAMETER CAPACITY
1020699
CONE JAW CHUCK
14-0158
14-1102
14-1568
863810
14-0168
LENGTH
HEX SIZE BODY/NUT
IN
IN
.040 IN | 1/4 IN
0.9 IN
0.75 / 0.75
MINI CHUCK - COLLET ONLY
1/8 IN
0.65 IN
MINI CHUCK - ASSEMBLY
1/8 IN
0.65 IN
MINI CHUCK - ADAPTOR ONLY
1/8 IN
0.65 IN
MINI COLLET NUT
3/16 IN
0.8 IN
MINI CHUCK - COLLET ONLY
1/4 IN
0.7 IN
14-1104
MINI CHUCK - ASSEMBLY
1/4 IN
0.7 IN
14-1569
MINI CHUCK - ADAPTOR ONLY
1/4 IN
0.7 IN
863806
MINI COLLET NUT
1/4 IN
0.8 IN
14-0170
MINI CHUCK - COLLET ONLY
6 MM
0.7 IN
14-1094
MINI CHUCK - ASSEMBLY
6 MM
0.7 IN
0.437 / 0.375
0.500 / 0.500
0.500 / 0.437
0.500 / 0.500
0.500 / 0.437
CLECOTOOLS.COM
275