Cleco 2019 Digital Catalog - Flipbook - Page 292
Riveting
RB41/RB42 Series - Compression Riveter C-Yoke Type
Up to 3/16” | 4.8mm Capacity Al rivets
• Smooth
controlled throttle movement for fast and slow approach.
with a safety throttle lever.
• Standard C Yoke Jaws - Special Versions Available
• The operator can adjust exactly the position of the rivet by adjusting
the snap holder (stroke 3mm/0.12”). This allows the operator to use the
same rivet set for different thicknesses.
• Different force/capacity options to suit the specific riveting requirements
• Select Rivet Set from:• RB 400 for countersink rivets
• RB 401 for universal head type rivets
• RB 402 for special reduced universal head rivets
• To develop maximum power the riveter must squeeze the rivet near to
the end of the riveting stroke. Therefore, the combined length of the
two rivets sets must be correct.
• Determine the correct length of rivet sets as shown
• Equipped
Riveting
CAPACITY ALUMINUM RIVETS
MAXIMUM FORCE
REACH
GAP
MAX TRAVEL
WEIGHT
MM | IN
T | LB
MM | IN
MM | IN
MM | IN
LB
IN
STD DIAMETER 5 MM
3.6MM | 9/64IN
1.4T | 3090 LBS
50 MM | 2.00 IN
36 | 1.41
35 | 1.38
4.8
10.8
MODEL
RIVET SQUEEZER SET SHANK DIAMETER
60103010
LENGTH
60103110
STD DIAMETER 3/16”
3.6MM | 9/64IN
1.4T | 3090 LBS
50 MM | 2.00 IN
36 | 1.41
35 | 1.38
4.8
10.8
60102010
STD DIAMETER 5 MM
4.8MM | 3/16IN
2.2T | 4850 LBS
50 MM | 2.00 IN
35 | 1.38
34 | 1.34
6.7
13.4
60102110
STD DIAMETER 3/16”
4.8MM | 3/16IN
2.2T | 4850 LBS
50 MM | 2.00 IN
35 | 1.38
34 | 1.34
6.7
13.4
292
CLECOTOOLS.COM