Cleco 2019 Digital Catalog - Flipbook - Page 293
Riveting
RB43/RB40/RB44 Series - Compression
Riveter- Alligator Jaw Type
Up to 7/32” | 5.6mm Capacity Al rivets
• Smooth
controlled throttle movement for fast and slow approach.
with a safety throttle lever.
• Standard Alligator Jaws - Special Versions Available
• The operator can adjust exactly the position of the rivet by adjusting
the snap holder (stroke 5 mm/0.12”). This allows the operator to use
the same rivet set for different thicknesses.
• Different force/capacity options to suit the specific riveting requirements
• Select Rivet Set from:• RB 400 for countersink rivets
• RB 401 for universal head type rivets
• RB 402 for special reduced universal head rivets
• To develop maximum power the riveter must squeeze the rivet near to
the end of the riveting stroke. Therefore, the combined length of the
two rivets sets must be correct.
• Determine the correct length of rivet sets as shown.
• Equipped
MAXIMUM FORCE
REACH
GAP
MAX TRAVEL
WEIGHT
MM | IN
T | LB
MM | IN
MM | IN
MM | IN
LB
IN
STD DIAMETER 5 MM
3.6MM | 9/64IN
1.4T | 3090 LBS
60 MM | 2.36 IN
55 MM | 2.16 IN
49 MM | 1.93 IN
4.59 LB
9.7 IN
60104110
STD DIAMETER 3/16”
3.6MM | 9/64IN
1.4T | 3090 LBS
60 MM | 2.36 IN
55 MM | 2.16 IN
49 MM | 1.93 IN
4.59 LB
9.7 IN
60101020
STD DIAMETER 5 MM
3.6MM | 9/64IN
1.8T | 3970 LBS
85 MM | 3.35 IN
55 MM | 2.16 IN
49 MM | 1.93 IN
6.8 LB
15.4 IN
60101120
STD DIAMETER 3/16”
3.6MM | 9/64IN
1.8T | 3970 LBS
85MM | 3.35 IN
55 MM | 2.16 IN
49 MM | 1.93 IN
6.8 LB
15.4 IN
60101010
STD DIAMETER 5 MM
4.8MM | 3/16IN
2.6T | 5730 LBS
60 MM | 2.36 IN
55 MM | 2.16 IN
49 MM | 1.93 IN
6.7 LB
14.4 IN
60101110
STD DIAMETER 3/16”
4.8MM | 3/16IN
2.6T | 5730 LBS
60 MM | 2.36 IN
55 MM | 2.16 IN
49 MM | 1.93 IN
6.7 LB
14.4 IN
60110010
STD DIAMETER 5 MM
5.6MM | 7/32IN
3T | 6610 LBS
58 MM | 2.28 IN
35 MM | 1.38 IN
45 MM | 1.77 IN
11.2 LB
16.8 IN
RIVET SQUEEZER SET SHANK DIAMETER
60104010
CLECOTOOLS.COM
LENGTH
293
Riveting
CAPACITY ALUMINUM RIVETS
MODEL