Catalog FATH Engineering Components 18.1 - Catalog - Page 138
Scharniere Hinges
SCHARNIERE
HINGES
Führungsnasen für Aluminiumprofile
Viele unserer Scharniere können Sie auch mit Führungsnasen für
die Nuten von Aluminiumprofilen haben. Sie sichern das Scharnier
gegen Verdrehen und machen es belastbarer.
Wir haben alle unsere Scharniere so gestaltet, dass Sie diese Führungsnasen mit einem Schraubendreher einfach herausbrechen
können. Wenn Sie das Scharnier also anders einsetzen wollen als
ursprünglich geplant: kein Problem.
Guiding pins for aluminum Profiles
Many of our hinges can be supplied with fixing pins for the slots
of aluminum profiles. They prevent the hinge from rotating and
increase its load bearing.
We have designed and produced the hinges in such a way that
these fixing pins can be easily broken off with a screw driver, so
in case you wish to use the hinge in another way than initially
intended, this is not a problem.
Flächenelemente
Verwenden Sie das Scharnier ohne Führungsnasen, wie hier im
Katalog dargestellt.
Aluminiumprofile
Verwenden Sie das Scharnier mit Führungsnasen, passend zur
Nutbreite Ihres Profiles.
Flat surfaces
Use the hinge without fixing pins, as pictured here.
Aluminum profiles
Use the hinge with the fixing pins that fit the slot of your profile.
Maßtoleranzen
Folgende Maßtoleranzen gelten für die in diesem Katalog
gezeigten Produkte als Standard. Sprechen Sie mit uns, wenn
Sie in besonderen Fällen engere Toleranzen benötigen.
Dimensional Tolerances
The following dimensional tolerances are valid for the indications
in this catalog. Please contact us if you need lower tolerances in
special cases.
A1 = ± 0,5 mm
A2 = ± 0,5 mm
A1 = ± 0,5 mm
A2 = ± 0,5 mm
A1
Belastungsprüfungen
Ermittlung der maximalen Kraft [N] bis zu einer Höhe, bei der
Teile des Scharniers brechen.
A2
Load Bearing Tests
Indication of the maximum force [N] to the point when parts of the
hinge break.
radial:
FRmax.
axial:
Alle Angaben dienen Ihrer Information und stellen keine
rechtsverbindliche Zusicherung von Eigenschaften dar.
136
FAmax.
All information is just for reference and does not pose a legally
binding agreement about the product properties.
FATH GmbH Components | www.fath.net