Catalog FATH US Industrial Hardware 2.3 - Catalog - Page 4
Industrial Hardware
> Information
>> Catalog
TECHNICAL INFORMATION
Symbols
Dierent versions
supplied for le" and right
side installa#on
For le" and
right hand
installa#on
Padlockable
A'en#on
Concealedhinge
Detachable
hinge
Stainless
steel
Appropriate for devices
accordant to IP$% / NEMA &
External
hinge
Protection Categories according to IEC 60 539
The IP protection category is characterized by 2 digits. Example: IP 54
First Degree of protection against
Digit contact and foreign bodies
1
Second Degree of protection against water
Digit
Protected against solid foreign objects of Ø 50 mm and greater
1
2
Protected against solid foreign objects of Ø 12.5 mm and greater
2
Protected against vertically falling water drops when the enclosure is tilted up to 15°
3
Protected against solid foreign objects of Ø 2.5 mm and greater
3
Protected against splashing water
4
Protected against solid foreign objects of Ø 1.0 mm and greater
4
Protected against splashing water
5
Dust-protected
5
Protected against water jets
6
Dust-tight
6
Protected against powerful water jets
7
Protected against the eects of temporary immersion in water
Protected against vertically falling water drops
Protection Categories according to National Electric Manufacturers Association (NEMA)
The UL classications are not directly comparable with IP Protection Categories, since both the test conditions and the test results are dierent.
UL / NEMA Description
1
Protected against penetration of foreign bodies
3.3R
Protected against penetration of solid bodies, protected against the ingress of rain, and dust and damage caused by icing
3S
Protected against rain, snow and foreign bodies. External mechanisms remain usable despite being coated in ice.
4.4X
Protected against rain, foreign bodies, splashed water and hosed water, and against damage caused by icing on the exterior of the enclosure
12.12K
Protected against dust deposits, foreign bodies, and non-corrosive dripping liquids
13
Protected against dust deposits, sprayed water, oil, and non-corrosive dripping liquids
Stainless steel material specications
Germany
USA
Japan
Unied Numbering System
Werkstonummer
DIN
AISI
JIS
UNS
1.4301
X5CrNi18-10
304
SUS 304
S 30400
1.4305
X8CrNiS18-9
303
SUS 303
S 30300
1.4310
X10CrNi18-8
301
SUS 301
S 30100
1.4401
X5CrNiMo17-12-2
316
SUS 316
S 31600
1.4571
X6CrNiMoTi17-12-2
316Ti
SUS 316Ti
S 31635
INFO.US@FATH.NET | PHONE +1 407 601-5900
3