Product Catalogue - Bellman & Symfon - Catalog - Page 10
ALERTING PRODUCTS
9
10
Accessories
Expand your Visit solution
Bed shaker
BE1270
Mobile phone sensor
BE9250
Pager charger
BE1260
Contact mat
BE9026
Description
Description
Description
Description
The bed shaker generates powerful vibrations that wake even heavy sleepers.
The mobile phone sensor is activated when the mobile device’s screen lights up,
The pager charger is used to recharge the battery of your pager receiver. Place
The contact mat is used together with the telephone transmitter to detect when
Just place it under your mattress or pillow and connect it to any of the Visit
for example from an incoming call or message. Place it on top of the device and
it on the bedside table, and connect a bed shaker to be alerted if any of the
someone enters or leaves a room. When you step on the mat, the transmitter
receivers or charger accessories.
connect it to the telephone transmitter or directly to the flash receiver.
transmitters are activated while you are asleep.
signals the receiver that alerts you with sound, lights and vibrations.
Powerful vibrations Wakes heavy sleepers
Optical detection
Activated by the screen light
Charging time
~6h
Cord length
1.5 m
Anti-slip surface
Stays in place
Light sensitivity
Visible light > 3 lux
Battery backup
Works during power cuts
Connector
3.5 mm mono jack plug
Safe to use
Operates at low voltage
Connectors
Sensor: 2.5 mm tele jack plug
Adapter: 3.5 mm tele jack plug
Connectors
Two bed shaker jacks
Weight
255 g
Cord length
2m
Cord length
1.7 m
Colour
Black
Battery
1 AAA 1.5 V alkaline
Operating time > 1 year
Size and weight
78 88 43 mm, 385 g
Size
540 395 4,6 mm
Size and weight
88 88 27 mm, 120 g
Smart hub
BE1310
Repeater
BE1510
Wall mount bracket
BE9075
External microphone
BE9199 / BE9200
Description
Description
Description
Description
Visit Smart hub is a wireless communications hub that connects your home to
The repeater is used to extend the operating range of your Visit system. It is
The wall mount bracket is used to mount the flash receiver on a wall, so the
The external microphone is used together with the door transmitter. In an apart-
your hearing aids. It will help you to hear when the doorbell or phone rings,
useful in large properties or where there are dense walls. The repeater can also
flashing lights can be seen everywhere in the room. It comes complete with
ment you can for instance use it to detect the intercom, while using the door
when your partner needs you or if the smoke alarm goes off.
be used as multi-function transmitter.
screws, plugs and mounting instructions.
transmitter’s internal microphone to detect the doorbell.
Easy setup
Plug in and connect. That’s it
Reliable transmission Up to 200 m operating range
Material
Aluminium
Cord length
2.5 m / 0.75 m
Bluetooth®
Up to 30 m operating range
Signal repetition
Connect multiple units
Usage
For indoor use only
Microphone
Piezoelectric
Battery backup
Works even during power loss
Mains powered
Minimizes maintenance
Size
45 90 50 mm
Connector
3.5 mm mono jack plug
Auto-reconnection A clear acknowledge signal
Battery backup
Works during power cuts
Weight
110 g
Weight
15 g
Size and weight
Size and weight
60 98 30 mm, 110 g
Colour
White
Colour
White
100 65 27 mm, 120 g
Bridge
BE1520
Magnetic mounting kit
BE9175
Magnetic switch
BE9023
External trigger cable
BE9086
Description
Description
Description
Description
The bridge allows you to use Visit products that operate on the 433 MHz frequency
The magnetic mounting kit offers a quick and easy option to screws and plugs
The magnetic switch is used with the telephone transmitter to detect when
The external trigger cable is used to connect BE1370 to your Visit system. That
range together with those that operate on 868 MHz. It communicates in both
when mounting a smoke alarm. It consists of two self-adhesive plates - one that
for example a door or window is opened. When the magnets are separated the
means, it will alert you with flashes, sounds and vibrations when the doorbell
directions between the frequencies.
you attach to the ceiling and one that you attach to the smoke alarm.
transmitter signals the receiver that alerts you with sound, lights or vibrations.
or phone rings, when your partner needs you or if the smoke alarm goes off.
Reliable transmission Up to 200 m operating range
Magnetic mount
No need for screws/plugs
Cord length
0.5 m
Cord length
1.5 m
Two-way radio
Works in both directions
Easy to set up
Powerful adhesive
Connector
3.5 mm mono jack plug
Connector
3.5 mm stereo jack plug
Mains powered
Minimizes maintenance
Hassle-free
Facilitates battery change
Open switch
< 1 cm from magnet
Receiver connector 3.5 mm mono jack plug
Battery backup
Works during power cuts
Flexibel
Fits all Visit smoke alarms
Closed switch
> 2 cm from magnet
Weight
20 g
Size and weight
60 98 30 mm, 110 g
Weight
25 g
Weight
25 g
Colour
White