90495 2023 highres - Flipbook - Page 20
CLASSIC CAST PRESS
HAVE AN OLD SCHOOL PRESS AND THREAD
DIES INTO REMOVABLE, THREADED ADAPTER?
MODERNIZE YOUR PRESS WITH THE
BREECH LOCK SYSTEM
LEE PRECISION, INC.
PRESS NOW INCLUDES
BREECH LOCK ADAPTER
Gives you the ability to quick change dies
or remove the adapter to load
the mammoth 50 BMG
90512 1 1/4-12 16.00
90094 1 1/2-12 17.00
BAKED POWDER FINISH AND ALL STEEL LINKAGE
MAKE THE LEE CLASSIC CAST PRESS THE
MOST ATTRACTIVE AND DURABLE PRESS MADE
d
LARGE
& SMALL
SAFETY PRIME
RIGID
CAST IRON
FRAME,
CAST+and+
MACHINED
+with+ PRIDE
IN+the+USA
.
.
.
.
.
.
.
90997
LEE CLASSIC CAST PRESS
90998
250.00
The industry’s largest opening, and
longest stroke—handle adjusts to provide
least travel of any press.
Largest ram, 1 ⅛” diameter, supported by
over 12 square inches of ram bearing surface.
Spent primer disposal direct to trash can
with attached tube.
Powerful compound linkage with positive
travel stop prevents press toggle or “cam over.”
Rigid cast iron construction in a classic
“O” design for maximum strength.
Baked powder coating is durable and
makes a handsome addition to any reloading bench.
Large, flat cored base with 3 mounting holes,
mounts solid to any bench.
Automatic primer arms with bottom of
stroke priming for best feel. Includes both large
and small priming arms. No more fumbling with
tiny guides and springs when changing primer size.
d
CHANGES
EASILY FOR
LEFT-HANDED USE.
d
SPENT PRIMERS
COLLECTED AND
DROPPED INTO
FLEXIBLE PLASTIC
TUBE FOR EASY
EMPTYING.
Shown on optional Bench Plate. Order #90251
. Designed to work with both standard ⅞–14 and large series 1¼–12 dies.
Included Breech Lock adapter to accept standard ⅞–14 dies. Change
dies instantly with a quick twist of the wrist.
. Two-piece ram allows installation of the mammoth 50 BMG shell holder
or the shell holder insert for standard press shell holders. Shell holder
insert can be rotated to allow primer installation on the right or left side.
50 BMG Loading Block
Block dimensions 9’’ x 8’’
High impact, chemical resistant plastic
Holds 72 cases, can also be used to
store 7/8 – 14 die sets
Continuous flange surrounds tray for
easy lifting.
90632 15.00
1½ -12 to 1¼ - 12 Die
Adapter Bushing
Use the Lee 50 BMG and
other 1¼ series dies in
competitor's 50 BMG large
presses. 91697 12.00
NEW
1¼–12 Thread Series
Collet Dies
130.00
1¼–12 Thread Series
Shellholder not included
90515 50 BMG
Shellholder not included
*These dies do not include load data
20
the monster 50bmG
KIT INCLUDES EVERYTHING YOU NEED TO START RELOADING THE 50
50 CALIBER
BMG PRESS KIT
50 BMG 3-Die Set
1¼–12 Thread
130.00
90902 577/450 Martini-Henry *
90929 577 Snider *
90252 416 Barrett *
At lAst, An AffordAble wAy to reloAd
BREECH LOCK ADAPTER KIT also includes shell
holder insert, large & small primer arms and breech lock
adapter bushing to accept standard 7/8-14 dies so you
can load all your smaller cartridges. All this for less than
what others charge for dies alone.
90953 50 BMG
90745 338 Lapua
91985 404 Jeffery
90747 50 BMG
90635 338 Lapua
CLASSIC CAST
50 BMG PRESS KIT
LEE CLASSIC CAST PRESS • 50 BMG 3-DIE SET
SHELL HOLDER • RAM PRIME TOOL • AND TUBE
OF CASE SIZING LUBE
LARGE SERIES RELOADING DIES
1¼–12 Thread Series
Factory Crimp Dies 50.00
30.00
90515
170.00
90859
425.00
◀ 50 BMG Shell holder
90903
20.00
50 BMG ▶
Ram Prime Tool
90901 26.00