90495 2023 highres - Flipbook - Page 28
CASE TRIMMER | QUICK TRIM | CONDITIONING TOOLS
TWO GREAT WAYS TO TRIM CASES
* Ackley Improved Cases
use standard parent cartridge
Case Length Gauge
QUICK TRIM or CASE LENGTH GAUGE
FOR SAFETY SAKE, TRIM YOUR CASES
SHELLHOLDER
LOCK STUD
CASE LENGTH GAUGE
CUTTER
The simplest way
to check the case
and trim to the
correct safe length
is with a
Lee Case Trimmer.
Lee Case Trimmer
After a case has been loaded a few times, it will stretch beyond maximum length and must be
trimmed. There is no better system to check and trim cases than with the Lee Case Length
Gauge and cutter. You don’t need an expensive caliper to set length and never waste even a
single case setting up with the cut and try system common to all other brands. The piloted
cutter assures the case mouths are absolutely square and true to the case neck. Best of
all, the fixed length design assures it will never go out of adjustment.
The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length
Gauge (Pilot) and Shell Holder must be ordered as Case Length Gauge and Shell Holder
for each caliber— see chart listing at right and opposite page. You can trim cases by hand,
use an electric drill.
CUTTER and LOCK STUD
90110
Fits cases up to .468” in diameter.
LARGE CUTTER & LOCK STUD 90401
Can be used on any case.
6.98
9.98
CUTTER only with BALL GRIP
90275 9.98
THREADED LARGE CUTTER
AND LOCK STUD
90468 9.98
Large cutter with 8–32 thread shank for use
on popular powered case preparation centers.
3 Jaw Chuck Trimming Kit
91720
31.00
Hex shank fits popular, low-cost
cordless screwdrivers.
Universal 3 jaw chuck fits 25 ACP
to largest belted magnums without
changing shellholders.
Includes cutter and 3 jaw chuck.
Order cartridge specific case length
gauge separately.
Trim brass to the correct length while chamfering the case mouth
QUICKTRIM
Lee Quick Trim Case Trimmer
The Deluxe Quick Trim Case Trimmer quickly and precisely
trims your brass to the correct length at the same time
it chamfers the inside and outside of the case mouth.
No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press
and start trimming. A click adjustable stop allows trim
length adjustment in .001 of an
inch increments. Allows the user to
shorten case to a uniform shorter
length than standard, reducing
trimming frequency. Includes snap
on chip catcher. Order appropriate
Quick Trim die for each cartridge
listed on chart on upper right and
opposite page. 90437 30.00
28
www.leeprecision.com
17 Fireball
17 Hornet
17 Rem
204 Ruger
218 Bee
219 Zipper
22 Hornet
*22/250
220 Swift
221 Fireball
222 Rem Mag
222 Remington
*223 Remington
223 WSSM
224 Valkyrie
225 Winchester
240 Weatherby Magnum
243 Winchester
243 WSSM
6MM GT
25 WSSM
25-20 Winchester
25-35 Winchester
25-06 Remington
25-20 Winchester
250 Savage (250/3000)
*257 Roberts
257 Weatherby Magnum
26 Nosler
260 Remington
264 Winchester Magnum
270 Weatherby Magnum
270 Winchester
6.8 Western
270 Winchester Short Mag
28 Nosler
280 Rem ACK Improved
6.5 Weatherby RPM
284 Winchester
30-378 Weatherby Magnum
30-40 Krag
30/06 Springfield
*30/30 Winchester
300 AAC Blackout
300 H&H
300 H&H or Ultra Magnum
300 HAM’R
300 RSAUM
300 Remington Ultra Magnum
300 Savage
300 Weatherby Magnum
300 Winchester Magnum
300 Winchester Short Mag
303 British
LEE PRECISION, INC.
QUICK
TRIM DIE
16.00
CASE
LENGTH
GAUGE
Ltd. Prod.
QUICK
TRIM DIE
20.00
8.00
Ltd. Prod.
CASE LENGTH
GAUGE
13.00
91347
90611
90435
90439
91350
90354
90284
91370
91364
90225
91305
90111
90116
90118
90112
91283
90340
90179
90113
90114
91358
90673
90868
91339
90320
90119
91280
91281
91341
91979
90389
90221
90121
91306
91385
90334
90124
91374
91357
91342
90637
90121
90122
90123
91298
91307
90399
90993
90229
90128
91308
91279
91761
90393
90117
91284
91295
91375
91771
91362
91354
90291
90249
90689
90129
91309
90137
90140
90136
90443
90407
90141
91609
91343
91366
91356
90408
90441
90484
90325
90138
90143
90142
90034
90144
Chamfer Tool Must be used after Case Trimming. Unique design cuts
fast without chatter. One turn does the job. Chamfers and deburrs inside
and outside of case necks. Can also be used to remove the crimp from
primer pockets of military brass. Works better than tools costing several
times as much. 90109
3.98
Primer Pocket Cleaner Double ended design cleans both large and
small primer pockets. Primers can be fully seated for better accuracy
and safety. Costs so little and works so well, no reloader can afford to
be without one. 90101
2.98
Case Conditioning Kit Includes cutter and lock stud, chamfer
tool and primer pocket cleaner.
90950
12.98
Decapper & Base Easily removes crimped in primers
from military cases. Guaranteed unbreakable.
22 Caliber 90103 30 Caliber 90102
7.98
The ultimate in case trimming, speed and convenience
Deluxe Power Quick Trim
Cordless screwdriver pictured
is not included.
Trim and chamfer in a matter of seconds. Hex
shank snaps in to cordless screwdriver or drill
(sold separately) Includes power Quick-Trim
adapter, chip catcher and deluxe cutter assembly.
To complete your trimming setup, order cartridge
specific Quick Trim die from chart above and
90670
opposite page.
28.00