90495 2023 highres - Flipbook - Page 33
ReLOADIN
LOADING
G23
PRO AUTO DISK | AUTO DRUM POWDER MEASURES
CHARGE CASES WHILE
EXPANDING +the+ CASE MOUTH
Lee Pro Auto-Disk
Powder Measure
AUTO DRUM
Automatic case actuated drum powder measure. Accurately and automatically
dispense powder in your favorite cartridge. Two infinitely adjustable drums
included. Quick Change drums will accurately and reliably drop charges from
1 to 80 grains of powder.
“modern reloading” and all popular
lee die sets include load data
INCLUDES THE NEW POWDER MEASURE BOTTLE ADAPTER
Commercial reloaders or competitive shooters first
choice! Elastomer wiper and polytetrafluoroethylene (PTFE) non-stick metal casting make this the
smoothest operating measure. Large hopper with
integral shut-off valve makes changing powder or
disks super convenient. Brass thumbnuts attach the
hopper to the body so you can change disks with no
tools. Rubber wiper and seal prevents powder shearing
and makes it more leak-resistant with fine-grain powders. Increased safety with positive pull-back lever.
The measure is attached to the die with a swivel
adapter, allowing easy positioning and quick removal
when changing cartridges. Included positive pull
back lever reduces the chance of double charge when
progressive reloading.
Case actuated; never spill a charge.
Lee Pro Auto-Disk Powder Measure
AUTO-DRUM POWDER MEASURE
90811
55.00
INCLUDES ALL FOUR DISKS
90429
60.00
Exclusive elastomer wiper prevents powder shearing,
works great with difficult metering extruded powders.
Machined body with labyrinth groove mates to precision
molded nylon drums providing leak free fit with
the finest powders.
Drum is actuated by a steel sector and pinion gear train.
Quick-change hopper has on/off valve Sleek modern design,
all gears springs and levers inside the die cast housing.
Same swivel adapter as our famous Pro Auto-Disk powder
measure. Makes moving measure fast and convenient.
HANDGUN AND RIFLE DRUMS INCLUDED.
AUTO-DRUM POWDER MEASURE
PRO AUTO-DISK POWDER MEASURE
CARTRIDGE RANGE
25 AUTO TO 300 WIN MAG
USE
IDEAL FOR BOTH HANDGUN AND RIFLE
ADJUSTABILITY
INFINITELY ADJUSTABLE WITH INCLUDED
SMALL AND LARGE
QUICK CHANGE DRUMS
CONSISTENCY
EXTREMELY CONSISTENT
.01 CC INCREMENTAL CHARGE
ADJUSTMENT
9 MM TO 45 COLT
CARTRIDGE RANGE
IDEAL FOR HANDGUN
USE
SIMPLE SET UP
NOTHING TO ADJUST, NOTHING TO GET OUT OF ADJUSTMENT
USE LEE PUBLISHED LOAD DATA
CONSISTENCY
EXTREMELY CONSISTENT INCREMENTAL CHARGES
WIPER TO
PREVENT POWDER
SHEARING
YES
SWIVEL ADAPTER
FOR FAST, EASY
TRANSFER
YES
ON/OFF VALVE
YES
The Pro Auto-Disk comes with a complete set of four disks.
Each disk has six cavities, so you get 24 cavities
in all. The chart included on the rear of the instruction sheet
lists the capacity of each cavity with every type of powder.
If you reduce your charge 10% you can safely use this data without
weighing your charge. Fixed cavities are the safest way to meter powder
because they can’t be misadjusted or get out of adjustment.
PRO AUTO-DISK
ACCESORIES
Adjustable Charge Bar
Infinitely adjustable between .28
and 1.6 cc. Lifetime nylon with
solid brass, zero backlash micrometer. Easy to set.
Adjustable Charge Bar
90792 9.98
Lee Rifle
Charging Die Kit
Short and Long Charging Dies
are included. These dies work
the same as the pistol powder
through expanding dies, except
they do not expand the case
mouth. Rifle case expansion is
done in the sizing die. Can be
used on 22 caliber, and up to the
largest belted magnums.
Charging Die kit
90995 29.00
SHORT CHARGING DIE
22 HORNET TO 223 REM
YES
SWIVEL ADAPTER FOR
FAST, EASY TRANSFER
YES
ON/OFF VALVE
YES
Powder Measure
Riser
Installs between the Lee
Powder through Expanding
Die or Rifle Charging Die and
Powder Measure. Allows
convenient use of other
brands of dies that have
extended adjusting screws
and provides clearance for
the Lee Safety Prime.
Powder Measure Riser
90041
9.98
POWDER
THROUGH
EXPANDING DIE
pg. 8
NOTE Pro Auto-Disk
and Auto-Drum Powder
Measures must be used
with the powder through
expanding die supplied with
all Lee pistol dies, or Lee
Rifle Charging Dies (see left).
These dies may be purchased
individually. Sizes listed on
page 8.
Only Lee Dies
permit charging
the case while
expanding the
case mouth.
16.98
Double Disk Kit (not pictured)
90668
This kit raises the hopper so you can
stack two disks. Not only doubles the
capacity of the disks but it makes
very fine adjustments possible. Most
powders can be adjusted up or down
.1 grain with different combinations
of disks. Complete listing of combinations, 4 extra disks, screws and risers
are included.
Lee Double Disk Kit
90195 14.98
LONG CHARGING DIE
223 REM TO 300 WIN MAG
90194
WIPER TO PREVENT
POWDER SHEARING
16.98
www.leeprecision.com
33