Online Catalog 7.6 - Catalog - Page 17
15
(min.)
ROUTING INSTRUCTIONS
32
ECLIPS
Mini Barbed Channel Lock
15
(min.)
Edge boring for barbed post installation
METAL SNAPS
Surface Routing
Diameter: 5*
Depth: 16
16
Surface routing: section view
Surface routing: section view
Plunge Cut: Z: -3.0 | Slot Cut: X: 0 to 18
Plunge Cut: Z: -6.0 | Key Slot: X: -14 to 18
(Allowable depth range is -6.0 to -6.3)
Route GREEN first. Then GRAY.
18
z = -6.0
0
SPRING PIN & ROUTER BIT
z = -3.0
-14
All measurements are in mm
*If using MDF, replace 5mm drill bit with 5.2mm drill bit.
PATE NT PE N D I N G
To order, call 866-389-5393 or visit online at lockdowel.odoo.com/shop
17