Online Catalog 7.6 - Catalog - Page 9
20
(min.)
ROUTING INSTRUCTIONS
64
ECLIPS
9mm Barbed Channel Lock
20
(min.)
METAL SNAPS
Surface Routing
Diameter: 8*
Depth: 9.5
Edge boring for barbed post installation
32
Surface routing: section view
Plunge Cut: Z: -4.5 | Slot Cut: X: 0 to 34
Plunge Cut: Z; -9.0 | Key Slot: X: -30 to 34
(Allowable depth range is -9.0 to -9.3)
Route GREEN first. Then GRAY.
34
z = -9.0
0
SPRING PIN & ROUTER BIT
z = -4.5
-30
All measurements are in mm
*If using MDF, replace 8mm drill bit with 8.2mm drill bit.
PATE NT PE N D I N G
To order, call 866-389-5393 or visit online at lockdowel.odoo.com/shop
09