2022-Ultrafeed LS Guidebook - Flipbook - Page 51
68
H
Adjust the Driver
The driver (C ) is secured to the lower shaft with two set screws (H). Loosen the screws and gently twist the shuttle driver
to match (G). If the fit to the shaft is tight, carefully use a screwdriver as leverage. Do not allow the driver to move to
the left, which would be evident by the driver not being fully seated in the shuttle race guide shaft. Be sure the driver is
pushed all the way to the right. Once proper position is found, retighten the two set screws (H).
After adjusting the driver, check the left-right positioning of the shuttle gib hook (p. 49).
UltrafeedĀ® LS Guidebook
| 48