2022-Ultrafeed LSZ Guidebook - Flipbook - Page 13
12
How to Install a Feed Dog
1. Unscrew and remove the needle plate (C) from the
machine bed. This will expose the feed dog (D).
C
2. Unscrew (E) and remove the old feed dog from the
machine bed.
3. Install the new feed dog (F) and loosely tighten the
screws. The feed dog should be able to slightly move
side to side.
4. Lay the needle plate (C) over the feed dog (F).
Check to see whether the feed dog is straight in
the needle plate slots (G). Adjust as needed, then
remove the needle plate and finish tightening the
feed dog screws.
13
5. Reinstall the needle plate and screws into the
machine bed.
D
NOTE: Follow steps 3-5 of “How to Install Center &
Outside Feet” to reinstall the center and outside foot.
E
14
15
G
F
Ultrafeed® LSZ Guidebook
| 10