2022-Ultrafeed LSZ Guidebook - Flipbook - Page 24
Regulating Stitch Length
30
C
Forward Feed
B
A
+6mm
The EZ Setâ„¢ Stitch Length Plate (30)
sets both forward and reverse stitch
length. To set the stitch length, loosen
the two thumbscrews (A), slide the
posts up or down, and tighten the
screws. The thumbscrew stops (B)
restrict the movement of the Feed
Regulator Lever (C), which is spring
loaded to always rest against the upper
stop.
Sewing in Reverse
Position the needle fully up or fully
down and push the Feed Regulator
Lever (C) all the way down. Hold the
lever down until reverse sewing is
completed. The lever is spring loaded
and will return to its forward position
when you release it. When the machine
is operating at 1/4 speed or faster,
reverse can be engaged on the fly.
DO NOT rotate the balance wheel in
the wrong direction. Always rotate the
balance wheel by grabbing the top of
the wheel and rotating down toward
you (31).
31
A
B
-6mm
Reverse Feed
C
21 |
Sailrite.com