2022-Ultrafeed LSZ Guidebook - Flipbook - Page 45
61
When stopping to turn a corner,
the machine skips a stitch
At the corner, bury the needle to the bottom of
its travel and allow it to rise 1/8 inch. In this spot,
raise the presser foot and then pivot the work
on the needle to change sewing direction. Drop
the foot to continue sewing. Follow this process
to achieve the best quality corner stitch and
minimize the skipping of stitches at turns.
62
When removing fabric from under
the machine it pulls hard and three
strands of thread come up through
the throat plate
This usually happens when fabric is being
removed during the middle of a stitch cycle.
The hook under the machine still has a loop of
thread around it.
Before removing fabric from under the
machine, manually turn the machine forward
until the take-up arm (p. 15, K) reaches its
uppermost position, then starts to descend.
This allows the hook to release the thread
loop and proper upper tension to be applied to
finish the stitch.
UltrafeedĀ® LSZ Guidebook
| 42