Fabricator Guidebook - Flipbook - Page 22
Threading the Sewing Machine
1. Lift and lock the presser feet in the up position
(p. 2).
J
2. Thread comes off the top of the cone to the
thread stand arm (A).
D
3. Pass the thread toward you through the far right
hole of the three hole thread guide (B); then, up
over the top and through the back of the leftmost
hole.
4. Pass the thread through the top hole of guide
(C), bring thread around to the front, then through
the bottom.
5. Pull the thread over the top of and between the
tension disks (D), then down through (E).
6. Pass the thread around and between the tension
disks (F) in a clockwise motion, being sure the
thread goes all the way to the core post.
7. Pass the thread up through the thread take-up
spring (G) and then under the thread guide (H).
8. Lead the thread upward through the elongated
thread finger (I) and then through the take-up
arm (J) from right to left.
9. Lead the thread down through thread finger (K)
then (L), and then through the needle bar thread
guide (M) from front to back.
C
E
K
I
H
F
L
M
N
10. Pass the thread from left to right through the eye
of the needle (N) and draw the thread about 8
inches through the needle eye.
19 |
Sailrite.com