Fabricator Guidebook - Flipbook - Page 26
Setting the Stitch Length & Operating in Reverse
The stitch length regulating dial (A) indicates the stitch length in millimeters. To set the stitch length,
first lift the presser feet. Then press and hold the tab labeled “PUSH” to unlock the dial. At the same
time, press the reverse lever (B) partway down and rotate the dial within its range of 0mm and 8mm
to your desired stitch length. Release the tab and reverse lever.
To sew in reverse, press lever (B) down fully. Forward movement is automatically restored when lever
(B) is released. It is best to initiate reverse when the machine is in motion, but you may also manually
rotate the balance wheel so the needle is either in its highest or lowest position before pressing the
reverse lever and starting to sew from rest.
31
A
B
23 |
Sailrite.com