Fabricator Guidebook - Flipbook - Page 41
Stitch Length Adjustment Between Forward & Reverse
Set the machine to an 8mm stitch length. Tilt the machine so it is hinged back in the table.
Hold the reverse lever down and rotate the balance wheel until the slotted cam (E) is fully shown.
Loosen screw (F) to adjust the cam (E) with a small, flathead screwdriver (58).
Turn the slotted cam counterclockwise to shorten the forward stitch length and lengthen the reverse
stitch length. Turn the cam clockwise to lengthen the forward stitch length and shorten the reverse
stitch length.
Tighten screw (F) to check for equal distance between forward and reverse stitch.
58
F
E
Sailrite® Fabricator® Guidebook
| 38