Fabricator Guidebook - Flipbook - Page 9
Manual Oiling
6
Remove the rubber plugs on top of the machine
head (F and G) and put a small amount of
oil in hole (F); then, lift the presser foot and
run the machine at a moderate speed for a
few seconds. (G) is an access hole to get to
an internal oil port hole about 1" inside the
machine. Occasional manual oiling of the hook
and internal moving parts is recommended even
for auto-lubricating sewing machines. Put a drop
of oil on anything that looks like a gear, cam or
slide.
NOTE: Once oiled, sew a scrap piece of
material to make sure all excess oil is worked
out of the machine so it does not leak onto your
next project.
5
F
G
Sailrite® Fabricator® Guidebook
D
| 6