Leatherwork Guidebook - Flipbook - Page 17
Installing Bobbin
in Bobbin Case
12
G
1. Insert a threaded bobbin (A) into the bobbin
case (B) as shown in image (12).
2. Hold the tail of the thread while pushing the
bobbin into the bobbin case.
3. Pull the thread through the slit (C) in the
edge of the bobbin case.
B
A
4. Continue pulling the thread under the
tension plate (D).
5. Snap thread into position under tension
plate and pull out about 12 to 18 inches of
thread, checking for consistent tension.
6. Holding the case with a view of the bobbin,
the bobbin should turn clockwise when pulling
on the thread tail (13). If it is not, take the
bobbin out and flip it over.
A
B
C
D
Bobbin
Bobbin Case
Slit
Tension Plate
Leatherwork® Guidebook
E
D
I
C
13
E Spring-Loaded Lever
G Finger
I Tension Adjustment Screw
| 14