Leatherwork Guidebook - Flipbook - Page 45
48
H
I
G
Adjust the Driver
4. The driver is secured to the lower shaft with two set screws (G). Loosen the screws and gently
twist the Shuttle Driver to match (47, F). If the fit to the shaft is tight, carefully use a screwdriver
as leverage. Do not allow the driver to move to the left, which would be evident by any play
between H and I. Once proper position is found and there is no play between H and I, retighten
the two set screws (G)
After adjusting the driver, check the left-right positioning of the Shuttle Gib Hook (p. 43).
Leatherwork® Guidebook
| 42