Wateq Online Catalogue - Flipbook - Page 32
WATER FILTERS
CLACK® FILTER-AG+® TURBIDITY FILTERS
Clack’s Filter AG+ media will filter down to 3 to 5 microns, using a blend of a clinoptilolite
natural media with a large surface area and microporous structure. This creates a surface area
over 100 times greater than silica sand. The rough surface and internal porosity provide a high
surface area for efficient reduction of suspended matter.
The turbidity removal media’s structure typically creates less pressure loss through the filter
and allows deeper sediment penetration into the bed for higher sediment loading and longer
filter runs. The deep bed filtration capacity of turbidity removal media prevents a rapid build-up
of head loss and blinding problems that are associated with typical sand filters.
These are typically installed to remove any solids that may be in suspension within the water.
The aim is to trap them between the filter media when the unit is in service. These will then be
removed when the flow is reversed during the backwash cycle. They also help protect other
treatment equipment as turbidity can blind other filter medias, causing them to lose their
effectiveness.
Clack Filter AG+ units are suitable for residential, commercial and industrial applications.
KEY INFORMATION AND PRICING
Ref
Description
Control
Valve
Tank Size
*Media
Volume
Flow Rate
Minimum Backwash
Requirement
Price
(ex VAT)
FAGP1-C1
1.49 m3/hr Filter AG+ WS1 System
Clack WS1
10” x 54”
1.0 ft3
1.49 m3/hr
1.86 m3/hr
£298.14
FAGP1.5-C1
2.14 m3/hr Filter AG+ WS1 System
Clack WS1
12” x 52”
1.5 ft3
2.14 m3/hr
2.67 m3/hr
£332.41
FAGP2-C1
2.51 m3/hr Filter AG+ WS1 System
Clack WS1
13” x 54”
2.0 ft3
2.51 m3/hr
3.14 m3/hr
£360.83
FAGP2.5-C1
2.91 m3/hr Filter AG+ WS1 System
Clack WS1
14” x 65”
2.5 ft3
2.91 m3/hr
3.64 m3/hr
£435.35
FAGP4-C1
3.80 m3/hr Filter AG+ WS1 System
Clack WS1
16” x 65”
4.0 ft3
3.80 m3/hr
4.75 m3/hr
£480.18
FAGP5-C1
4.81 m3/hr Filter AG+ WS1 System
Clack WS1
18” x 65”
5.0 ft3
4.81 m3/hr
6.02 m3/hr
£605.90
FAGP7-C15
6.55 m3/hr Filter AG+ WS1.5 System
Clack WS1.5
21” x 60”
7.0 ft3
6.55 m3/hr
8.19 m3/hr
£1,160.44
FAGP8-C15
8.56 m3/hr Filter AG+ WS1.5 System
Clack WS1.5
24” x 69”
8.0 ft3
8.56 m3/hr
10.70 m3/hr
£1,350.89
FAGP11-C15
13.37 m3/hr Filter AG+ WS1.5 System Clack WS1.5
30” x 72”
11.0 ft3
13.37 m3/hr
16.71 m3/hr
£2,070.09
FAGP20-C2
19.25 m3/hr Filter AG+ WS2 System
Clack WS2
36” x 72”
20.0 ft3
19.25 m3/hr
24.06 m3/hr
£3,550.11
FAGP25-C2
26.20 m3/hr Filter AG+ WS3 System
Clack WS3
42” x 78”
25.0 ft3
26.20 m3/hr
32.76 m3/hr
£5,590.21
FAGP33-C3
34.22 m3/hr Filter AG+ WS3 System
Clack WS3
48” x 82”
33.0 ft3
34.22 m3/hr
42.79 m3/hr
£6,080.05
FAGP49-C3
40.94 m3/hr Filter AG+ WS3 System
Clack WS3
55” x 104”
49.0 ft3
40.94 m3/hr
56.18 m3/hr
£10,190.81
* Filter AG+ 1 ft/3 / bag
32
www.wateq.co.uk
BACK TO INDEX PAGE
WATEQ SOUTH : 0203 744 5934
WATEQ NORTH : 0161 250 2040