Wateq Online Catalogue - Flipbook - Page 8
CLACK® WS1.25 METERED SIMPLEX SOFTENERS
WATER SOFTENERS
Wateq’s Clack WS1.25 simplex water softeners are best suited to domestic
applications where the property is a little larger and requires a higher peak flow rate.
This would be small hotels or accommodations housing more than 6 people. The
WS1.25” valve is capable of a max flow rate of 7.7m3/hr and should be used on
applications where soft water is not required 24 hours a day. As this utilises a single
high-quality vessel and premium softener resin. Untreated hard water will pass to
service when the system goes into regeneration, this will occur overnight. The
system will still allow untreated water to pass, so there is no chance of not having
access to water. Although suited to larger domestic properties, Clack WS1.25 water
softener units are also suitable for smaller residential properties as well as
commercial and industrial applications.
Our meter controlled system will also save on salt usage, allowing the valve to
calculate the optimal time to regenerate, and therefore not unnecessarily
regenerating and wasting salt.
We can tailor the regeneration process so that this can occur during low periods of
water usage, this ensures that there is never an interruption to the supply of water.
These systems are ideal for situations that do not require soft water 24/7. Ideally
water usage per day should be between 12m3 – 33m3 for this system to be most
effective.
Our systems are built by our team of senior engineers providing the reliability you
require and have a typical resin life expectancy of around 10 to 15 years.
KEY INFORMATION AND PRICING
Ref
Description
Tank Size
Resin
Quantity
Flow Rate
* Capacity
@ 300 ppm
** Salt Usage
Per Regen
Price
(ex VAT)
SS75-C125
75 Litre, WS1.25 Metered Softener
13” x 54”
75 Litres
3.00 m3/hr
12.50 m3
9.0 kg
£507.21
SS125-C125
125 Litre, WS1.25 Metered Softener
14” x 65”
125 Litres
5.00 m3/hr
20.83 m3
15.0 kg
£664.48
SS150-C125
150 Litre, WS1.25 Metered Softener
16” x 65”
150 Litres
6.00 m3/hr
25.00 m3
18.0 kg
£744.19
SS200-C125
200 Litre, WS1.25 Metered Softener
18” x 65”
200 Litres
7.70 m3/hr
33.33 m3
24.0 kg
£915.22
* Capacity based on 50g CaCO3 hardness removed per litre of resin.
** Salt usage based on 120g per litre of resin. This will increase if salt dosage is increased.
SPECIFICATION
Ref
DLFC
Size
Injector
Colour
Brine Tank Volume
* Brine
Volume
** Water Usage Per
Regeneration
Regen
Time
Inlet/ Outlet
Options
SS75-C125
5.3 gpm
Yellow
145 Litres
28.80 Litres
470 Litres
75 Mins
1 ¼”
SS125-C125
6.5 gpm
Green
145 Litres
48.00 Litres
615 Litres
95 Mins
1 ¼”
SS150-C125
7.5 gpm
Orange
200 Litres
57.60 Litres
696 Litres
85 Mins
1 ¼”
SS200-C125
9.0 gpm
Light Blue
350 Litres
76.80 Litres
994 Litres
97 Mins
1 ¼”
* Brine volume based on a suggested 3.2 litres per kg of salt.
** Approximate volume, may fluctuate depending on incoming pressure.
8
www.wateq.co.uk
BACK TO INDEX PAGE
WATEQ SOUTH : 0203 744 5934
WATEQ NORTH : 0161 250 2040