Weller The Original. NAM 2019 - Flipbook - Page 35
Soldering Stations | WX Line
WXD2 Desoldering station
1x USB, 2x RS232, 1x
Automatic tool identification
Traceability (unit data)
Air consumption l/min
max. 55 kPa (8psi)
Outer diameter 6 mm
(0.24 "), oil-free, dry
255 x 128 pixels
Compressed air connection
No tedious cleaning
The new, extended nozzle shaft prevents the
suction tube from sticking. Since the suction
channel has also been replaced, the once
tedious and time-consuming task of cleaning
the tool is now a thing of the past.
Thanks to ingenious mountings, the
suction nozzle and solder cartridge can be
changed quickly and easily – without the
risk of burns or tricky replacement work.
Huge cost savings
The relatively low operating temperature
(380°C) and automatic standby mode
controlled by the use sensor increase the
service life of the suction nozzles by a
factor of 3.
A vacuum run-on time can be set to
prevent the suction pump blocking.
With its 120 watts and extremely short
heating time, the desoldering iron can
easily handle jobs that would have been
difficult in the past, including desoldering
high mass PCBs.
Circuit board holder
200 - 999
Fastest desoldering iron
100 - 550
The maintenance-free Venturi unit
produces a constant vacuum using an
external compressed air supply.
6.69 x 5.94 x 5.12
174 x 154 x 135
200 W (255 W)
Two models are available.
The WXDP 120 is designed for horizontal
operation and the WXDV 120 for vertical
Dimensions L x W x H (Inches)
Dimensions L x W x H (mm)
Weight (approx.) in kg
(depends on tool) °C
(depends on tool) °F
Temperature accuracy °C
Temperature accuracy °F
Temperature stability °C
Temperature stability °F
Hot air heating gun
External compressed air supply
and safety rest
REMOVE SOLDER WITH THE
IRONS IN THE WORLD.