Weller The Original. NAM 2019 - Flipbook - Page 40
Soldering Stations | WX Line
WX2 Soldering Station
A NEW ERA OF SOLDERING.
Cost saving because only one power unit is needed for different applications.
Use as benchtop controller saves energy.
Lowering the running costs by enlarged tip lifetimes.
Reduction of rework due to optimized tool use
and correct working temperature.
Dimensions L x W x H (Inches)
Dimensions L x W x H (mm)
Weight (approx.) in kg
(depends on tool) °C
(depends on tool) °F
Temperature accuracy °C
Temperature accuracy °F
Temperature stability °C
Temperature stability °F
Automatic tool identification
Traceability (unit data)
Equipotential bonding socket
Weller heating technologies deliver precise
performance on demand.
Quick heating time
210 - 999
Blue LED ring light (light is out = Off, light
is blinking = standby or heating up, light is
on = tip ready for use)
100 - 550
1x USB, 2x RS232, 1x
Visual process control
through LED signal function
6,85 x 6,06 x 5,31
174 x 154 x 135
200 W (255 W)
255 x 128 dots /
Via 3,5 mm pawl socket
on back of device
WX soldering irons heat in ultra-quick time
and can be used immediately.
± 2 °C
All WX soldering tools have a temperature
stability of ± 2° C and a temperature
accuracy of ± 9° C, as per IPC standard.
The robust touch screen is a capacitive
touch panel made of real glass. It is antistatic and temperature-resistant. The turnand-click wheel with confirm button allows
Huge energy savings
Thanks to an integrated sensor, WX tools
are motion activated. This means that
they consume power only when they are
actually in use. Connected accessories
also go into standby mode.