Water Soluble Paper and Tape Aquasol Corporation WSP.B2.1018.R3 - Flipbook - Page 3
HOW TO CREATE AN AQUASOL® WATER SOLUBLE PURGE DAM
1
TRACE & IMPRESS
2
Trace pipe’s inner diameter. Create an
impression of the pipe. Fold to form 90˚ angle.
3
SLIT
Slit approximately 1" to 2" segments
perpendicular to impression on paper.
CUT
Cut the circle 1.3 times greater than
pipe diameter.
4
POSITION PIPE & TAPE IN PLACE
Cut Aquasol® Water Soluble Tape into
pieces and secure in place.
Make first slit at 12 o’clock position followed
by 3 o’clock, 6 o’clock and so on.
5
REPEAT
•
Repeat process on other side.
•
•
Cover root gap with
EZ Zone® Tape.
Your set up is complete.
Introduce argon via the
root gap.
aquasolwelding.com